Innocard GD1403A U.2 PCIe Gen4 to M.2 NVMe 22x80mm Adapter
Converts an M.2 2280 NVMe SSD to a U.2 SFF-8639 bay with PCIe Gen4 16GT/s support and 3.3V hot-plug power protection
- Adapter typePCIe Gen4
- PCIe Gen4 16GT/s bandwidth for NVMe speed
- 3V hot-plug power protection with 6.5A continuous current
- Sideband 3.3V or 1.8V switching for M.2 flexibility
- SMBus hot-swap support with level shifting
- PWM 12V to 3.3V converter with 5.5A max output
Purpose & Audience
This adapter converts an M.2 NVMe 22x80mm solid-state drive to a U.2 SFF-8639 interface. It is built for system integrators and technicians who need to install an M.2 NVMe module into a U.2 hot-swap bay or backplane.
Critical Specification
The board implements a PCIe Gen4 16GT/s link through the SFF-8639 connector with pin-out defined by SFF-9402 Rev1.1. This single interface speed determines whether the host platform can saturate the attached NVMe device.
Included Extras
On-board power circuitry provides a PWM 12V to 3.3V synchronous buck converter rated at 5.5A maximum output with overcurrent, undervoltage and thermal protections. A 3.3V hot-swap controller supports 6.5A continuous current, 400W TVS ESD protection and 1.8V/3.3V sideband level shifting for SMBus, PERST#, CLKREQ# and WAKE# signals.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $43.99
- Pricier than about 86% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Questions about this item
What does the 16GT/s figure mean for an M.2 drive installed in this adapter?
The adapter passes PCIe Gen4 16GT/s signalling through to the M.2 NVMe SSD, so the drive can run at its full Gen4 speed when the host U.2 port also supports Gen4.
Which U.2 pin-out standard does the SFF-8639 connector follow, and what does that cap in practice?
The built-in SFF-8639 connector follows SFF-9402 Rev1.1 pin-out, capping the link to PCIe Gen4 16GT/s and the power path to the adapter's 3.3V 5.5A and 6.5A protection limits.
What physical space and mounting does the adapter need for a 22x80mm M.2 module?
It accepts a single M.2 2280 NVMe SSD (22mm wide, 80mm long) and plugs into a standard U.2 SFF-8639 backplane or cable, requiring no extra brackets beyond the drive's own screw.
More in Other Adapters & Couplers
Similar items
Innocard SFF-8639 PCIe 4.0 to M.2 22x110mm gender changer
- PCIe Gen4
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard U.3 SFF-8639 PCIe Gen4 M.2 NVMe gender changer Hot-swap power protection TVS ESD
- PCIe Gen4
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
Hetai Tech X16 4-Port M.2 NVME Adapter with Heatsinks
- USB to DB9 (RS-232)





