Innocard U.3 SFF-8639 PCIe Gen4 M.2 NVMe gender changer Hot-swap power protection TVS ESD
Adapter converts M.2 NVMe SSD to U.3 SFF-8639 with PCIe Gen4 16GT/s, 5.5 A power, 400 W TVS ESD and hot-swap protection
- Adapter typePCIe Gen4
- PCIe Gen4 16 GT/s bandwidth for fast NVMe storage
- U.3 SFF-8639 to M.2 NVMe conversion with SFF-9402 Rev1.1 pin-out
- Hot-swap power protection with eFuse and 400 W TVS ESD suppression
- 5 A maximum output current with programmable 6.5 A limit and inrush control
- Comprehensive voltage safeguards including UVLO, OCP, over/under voltage and thermal shutdown
U.3 to M.2 NVMe gender changer
This Innocard adapter converts an M.2 NVMe solid-state drive to a U.3 SFF-8639 interface. It operates at PCIe Gen4 speeds of 16 GT/s. The unit is designed and manufactured in Taiwan.
Suits hot-swap bays needing power protection
Builders installing M.2 NVMe drives into U.3 backplanes with hot-swap capability will find the integrated eFuse and TVS protection useful. Systems without a U.3 connector or without hot-swap requirements cannot use this changer.
Deciding spec: 5.5 A maximum output current
The onboard PWM buck converter delivers up to 5.5 A at 3.3 V to the M.2 drive with overcurrent, undervoltage and thermal safeguards. If the target SSD draws more than this limit, the adapter will shut down.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $43.99
- Pricier than about 86% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Questions about this item
What PCIe generation does this U.3 to M.2 adapter support and what is the maximum data rate?
This adapter supports PCIe Gen4 with a maximum data rate of 16GT/s.
What physical connector standard and pin-out specification does the U.3 side of this adapter use?
The U.3 side uses an SFF-8639 connector with a 30u” gold plating and a pin-out defined by the SFF-9402 Rev1.1 specification.
How is the M.2 NVMe SSD powered on this adapter and what protection does the hot-swap circuit provide?
A PWM synchronous buck converter steps 12V down to 3.3V for the M.2 drive with a 5.5A maximum output current, while the built-in eFuse provides hot-plug protection with a programmable 6.5A current limit and inrush current slew rate control.
More in Other Adapters & Couplers
Similar items
Innocard SFF-8639 PCIe 4.0 to M.2 22x110mm gender changer
- PCIe Gen4
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard GD1403A U.2 PCIe Gen4 to M.2 NVMe 22x80mm Adapter
- PCIe Gen4
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
Hetai Tech X16 4-Port M.2 NVME Adapter with Heatsinks
- USB to DB9 (RS-232)





