XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80GB 2.5-inch internal SSD with SATA interface, 270MBps read and 90MBps write speeds, MLC memory and 1,200,000-hour MTBF
The Intel 320 Series SSDSA2CW080G310 is an 80GB 2.5-inch internal solid state drive built for consumer desktops and notebooks. It uses a SATA II interface and Intel 25nm MLC NAND flash memory. The drive serves as a direct replacement for mechanical hard drives in systems with standard SATA connectors.
Typical idle power consumption is 100 mW and active power consumption is 150 mW. With no moving parts the drive produces no acoustic noise during operation. Solid-state construction also provides shock resistance up to 1500G and an MTBF of 1,200,000 hours for reliable long-term use.
The 9.5mm height and 2.5-inch form factor match standard drive bays in laptops and desktops. Weighing 0.19 lbs it adds minimal mass to portable systems. Low power draw reduces demand on the system power supply and helps extend battery life in mobile devices.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | 320 Series |
| Model name | SSDSA2CW080G310 |
| Total capacity | 80 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | Up to 270 MB/s |
| Sustained sequential write rate | Up to 90 MB/s |
| Storage | |
| NAND flash type | MLC |
| Controller chip | Intel |
| Ports & slots | |
| Interface type | SATA II |
| Power | |
| Idle power draw | 100 mW Typical |
| Active power draw | 150 mW Typical |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 9.5 mm |
| Product weight | 0.19 lb (0.09 kg) |
| Shipping weight | 0.08 kg |
| Package size | 102 × 71 × 9 mm |
| Environment & compliance | |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,200,000 h |
Mount the drive in a 2.5 inch bay or use a bracket for a 3.5 inch bay, connect the SATA data cable to a SATA 300 port and the SATA power cable, then enable AHCI in the BIOS before installing the operating system.
The MLC NAND has a finite write endurance; monitor the SMART wear-level indicator and plan replacement when it approaches the rated limit, as the drive has no user-serviceable parts.
Sustained sequential write speed caps at 90 MBps, so long large-file transfers will hit that throughput ceiling before the 270 MBps read limit or the 150 mW active power envelope become factors.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?