XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 SATA internal SSD with 240GB capacity, up to 560 MBps read and 480 MBps write speeds, plus AES 256-bit encryption
The Intel 540s Series SSDSCKKW240H6X1 is a 240GB internal solid-state drive built in the M.2 2280 form factor with a SATA III interface. It uses 16nm TLC NAND and includes AES 256-bit hardware encryption for data security. This drive suits laptops or compact desktops where a low-profile SATA storage upgrade is required.
With no moving parts the drive runs silently and produces minimal heat in everyday workloads. Power consumption is rated at 55mW during idle and 150mW when active, helping to extend battery life in mobile systems. The low-power design keeps thermal output modest inside tight chassis.
The drive replaces a 2.5-inch SATA hard drive or an older SATA SSD, delivering sequential reads up to 560 MBps and writes up to 480 MBps. Random performance reaches 78000 IOPS read and 85000 IOPS write for snappier application loading. The jump is worth it when moving from mechanical storage or a lower-capacity SATA SSD to gain speed, silence and 240GB of space in an M.2 slot.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | 540s Series |
| Model name | SSDSCKKW240H6 × 1 |
| Total capacity | 240 GB |
| Product type | Internal Solid State Drive (SSD) |
| Performance | |
| Sequential read speed | Up to 560 MB/s |
| Sequential write speed | Up to 480 MB/s |
| Random read (4K) | Up to 78,000 IOPS |
| Random write (4K) | Up to 85,000 IOPS |
| Storage | |
| NAND flash type | TLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 55mW |
| Active power draw | 150mW |
| Size & build | |
| Form factor | M.2 2280 |
| Shipping weight | 0.10 kg |
| Package size | 133 × 98 × 23 mm |
Insert the drive into the M.2 slot at an angle, press flat, and secure with the retention screw. The step often missed is enabling SATA mode for the M.2 slot in BIOS, otherwise the drive will not appear.
No mechanical maintenance is required. The 16nm TLC NAND has a finite write endurance; once the reserved spare blocks are exhausted the drive becomes read-only and must be replaced.
The SATA III interface caps sequential write throughput at 480 MBps, so the bus saturates before the controller or NAND reaches its own thermal or performance ceiling.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?