Intel 545s 2.5" 256GB SATA internal SSD SSDSC2KW256G8X1
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5 inch SATA internal SSD with 128GB of 3D TLC NAND, delivering up to 550 MBps read and 440 MBps write speeds for faster boot and application load times
Capacity 128GB
The Intel 545s 128GB 2.5-inch SATA internal SSD is built for consumer PCs that need a direct hard-drive swap. It uses 64-layer 3D TLC NAND and delivers sequential reads up to 550 MBps and writes up to 440 MBps. Random performance reaches 70,000 read IOPS and 80,000 write IOPS.
Confirm your system has a free SATA III port and a 2.5-inch drive bay or adapter before ordering. The drive draws 4.5W active and 50 mW idle, so a standard SATA power connector is sufficient. Operating range is 0°C to 70°C.
A 7 mm z-height lets it slide into slim notebooks and standard desktops alike. AES 256-bit self-encryption secures data without extra software. With 72 TBW endurance and 1,600,000-hour MTBF it frees you from mechanical-drive failures and noise.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | 545s Series |
| Model name | SSDSC2KW128G8 × 1 |
| Total capacity | 128 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 440 MB/s |
| Random read (4K) | Up to 70,000 IOPS |
| Random write (4K) | Up to 80,000 IOPS |
| Read latency | 50 µs |
| Write latency | 60 µs |
| Storage | |
| NAND flash type | 3D TLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 50 mW |
| Active power draw | 4.5 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Product weight | 35g |
| Shipping weight | 0.14 kg |
| Package size | 157 × 122 × 23 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1500G (Max) at 0.5 msec |
| Vibration tolerance | Operating: 2.17 GRMS (5-700 Hz) Non-Operating: 3.13 GRMS (5-800 Hz) |
| More details | |
| Mean time between failures | >= 1,600,000 h |
Other versions of this model
The drive is supplied as a bare 2.5-inch SATA unit; no bracket, screws, cables or migration software are included, so you will need to source any required mounting hardware or cloning tools yourself.
The 128GB model suits a boot drive plus essential apps; step up to 256GB or 512GB if you also store large media libraries, game installs or virtual machines on the same drive.
On a typical SATA III platform the drive cuts cold-boot time roughly in half versus a mechanical disk and sustains large-file copies near the rated 440 MBps, while small-file responsiveness is backed by 70,000 read and 80,000 write IOPS.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?