We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SATA SSD with black label, 7mm thick

Intel

Intel D3-S4510 7.68TB enterprise SSD 2.5" Sata

SKU CH-GPQG-82V22

A 7.68 TB Sata enterprise SSD delivering 560 MBps read and 490 MBps write with 1.2 PBW endurance and AES 256-bit encryption

  • Total capacity7.68 TB
  • Sequential read speedUp to 560 MB/s
  • Sequential write speedUp to 490 MB/s
  • Interface typeSATA III
  • Form factor2.5 in (6.35 cm)
  • NAND flash type3D2, TLC

Capacity 7.68TB

  • 68TB capacity fits read-intensive workloads in legacy SATA bays
  • 560MB/s sequential read accelerates data access over HDDs
  • 2,000,000-hour MTBF supports long-term server reliability
  • AES 256-bit hardware encryption secures data at rest
  • Enhanced power loss protection guards writes during unexpected outages

Intel D3-S4510 7.68TB SATA Enterprise SSD

This 2.5-inch solid-state drive uses 3D TLC NAND and a SATA III 6Gb/s interface to deliver 7.68TB of storage for read-intensive server workloads. Sequential reads reach 560 MB/s while writes hit 490 MB/s with latencies of 36 µs and 37 µs respectively. End-to-end data protection, AES 256-bit hardware encryption and enhanced power-loss protection safeguard data integrity. The drive is rated for 1.2 PBW endurance and 2,000,000 hours MTBF.

Suits read-heavy arrays.

This drive targets servers that need high-capacity, low-latency reads within existing SATA backplanes and controllers. It operates at 1.0W idle and 3.0W active across a 0°C to 70°C range with 1000G shock resistance. Buyers who need higher write endurance or a different interface should look at other enterprise SSDs.

7.68TB capacity decides fit

The single specification that determines whether this is the right part is the 7.68TB usable capacity combined with the SATA III interface. If the storage array or server bay requires this exact capacity and a 2.5-inch 7mm SATA form factor, the D3-S4510 matches; otherwise a different drive is required.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $3,604.99
Pricier than about 79% of the 1,039 comparable items (median $992.99).
Total capacity 7.68 TB
Higher than about 80% of the 522 comparable items (median 3.2 TB).
Sequential read speed Up to 560 MB/s
Lower than about 70% of the 311 comparable items (median 6,500 MB/s).
Price per TB $469.40 per TB
Cheaper than about 63% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntel
Product lineD3-S4510
Model nameSSDSC2KB480G801
Part numberSSDSC2KB480G801
Total capacity7.68 TB
Performance
Sequential read speedUp to 560 MB/s
Sequential write speedUp to 490 MB/s
Read latency36 µs
Write latency37 µs
Storage
NAND flash type3D2, TLC
Ports & slots
Interface typeSATA III
Power
Idle power draw1.0 W
Active power draw3.0 W
Size & build
Form factor2.5 in (6.35 cm)
Overall height7 mm
Environment & compliance
Operating temperature range0 °C to 70 °C
Max shock tolerance1000G / 0.5 msec
Vibration toleranceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
More details
Mean time between failures2,000,000 h

Other versions of this model

5 more in the same range

Questions about this item

What SATA host interface does the Intel D3-S4510 7.68TB drive require for full 560 MBps read performance?

The drive uses a SATA III 6Gb/s interface. Connect it to a SATA 6Gb/s port on the motherboard or RAID controller to achieve the rated 560 MBps sequential read and 490 MBps sequential write speeds.

Can the Intel D3-S4510 7.68TB SSD replace a 3.5" hard drive in a legacy server backplane?

The drive has a 2.5"/7mm form factor. It fits 2.5" hot-swap bays directly; a 3.5" bay needs a 2.5"-to-3.5" adapter bracket. The SATA III 6Gb/s interface works with existing SATA backplanes and controllers.

How can I verify the Intel D3-S4510 7.68TB SSD is operating within specification after installation?

Check SMART attributes for temperature (0–70 °C range), media wear indicator, and power-on hours. Latency should be near 36 µs read and 37 µs write. The drive also logs temperature history and supports end-to-end data protection status reporting.

More in Server & Data Center SSDs

Similar items