Intel D3-S4610 3.84TB SATA 2.5" Enterprise SSD SSDSC2KG038T801
- 3.84 TB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Enterprise SATA SSD delivering 7.68TB capacity with 560MB/s read and 510MB/s write speeds for read-intensive workloads
Capacity 7.68TB
The Intel D3-S4610 delivers 7.68TB of 3D NAND storage in a 2.5-inch SATA form factor. It targets read-intensive enterprise workloads with a 3.0 PBW endurance rating and 3 drive writes per day. Hardware AES 256-bit encryption and end-to-end data protection secure data at rest and in flight.
Replacing HDDs with this drive cuts operating cost and raises service levels through 300x more IOPS per terabyte. Sequential reads reach 560 MBps and writes 510 MBps, while latency sits at 36 us read and 37 us write. Enhanced power-loss protection guards in-flight data during unexpected shutdowns.
The 7.00mm height fits standard 2.5-inch bays and existing SATA 6Gb/s backplanes without re-cabling. Active power draw is 3.1W and idle is 1.0W, easing thermal and power budgets. Operating range spans 0°C to 70°C with 1000G shock and 2.17 GRMS vibration tolerance for rack density.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | D3-S4610 |
| Model name | SSDSC2KG076T8 |
| Part number | SSDSC2KG076T801 |
| Total capacity | 7.68 TB |
| Performance | |
| Sequential read speed | Up to 560 MB/s |
| Sequential write speed | Up to 510 MB/s |
| Read latency | 36 us |
| Write latency | 37 us |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 1.0 W |
| Active power draw | 3.1 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1000G / 0.5 msec |
| Vibration tolerance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The drive uses the standard 2.5-inch form factor with a 7.00mm height, matching common enterprise drive bays and hot-swap trays.
Attach both the SATA data cable and the SATA power connector; the drive operates on SATA III and requires no extra drivers.
It is rated for 3.0 PBW total bytes written and 3 drive writes per day, with a 2,000,000-hour MTBF.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?