XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5" SATA internal SSD with 240GB of 3D NAND TLC storage delivering up to 500 MBps read and 260 MBps write speeds for data-center upgrades
This Intel DC S4600 Series drive delivers 240GB of storage in a 2.5-inch SATA III form factor. It uses Intel 3D NAND TLC memory and a proprietary controller to replace mechanical hard drives in existing server infrastructure. Sequential reads reach 500 MBps while writes hit 260 MBps. Random 4KB performance provides 72,000 read IOPS and 38,000 write IOPS.
The SSD targets IT teams modernising legacy platforms without changing drive bays or cabling. Its 2,000,000-hour MTBF and 3.2x lower annualised failure rate versus HDDs reduce replacement cycles. Active power draw is 3.1W and idle power is 0.9W, operating from 0°C to 70°C. Workloads needing higher throughput or different physical interfaces should evaluate alternative drives.
The single specification that decides fit is the SATA III interface, which limits maximum throughput to the figures above. Verify that the host system provides a 6Gb/s SATA port and a 2.5-inch bay before purchase.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | DC S4600 |
| Model name | SSDSC2KG240G701 |
| Total capacity | 240 GB |
| Product type | Internal Solid State Drive (SSD) |
| Performance | |
| Sequential read speed | Up to 500 MB/s |
| Sequential write speed | Up to 260 MB/s |
| Random read (4K) | Up to 72,000 IOPS |
| Random write (4K) | Up to 38,000 IOPS |
| Read latency | 36 µs |
| Write latency | 36 µs |
| Storage | |
| NAND flash type | 3D NAND TLC |
| Controller chip | Intel |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.9 W |
| Active power draw | 3.1 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Shipping weight | 0.09 kg |
| Package size | 140 × 114 × 10 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1000G / 0.5 msec |
| Vibration tolerance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| More details | |
| Mean time between failures | 2,000,000 h |
Yes, the 2.5" form factor matches standard SATA drive bays and uses the SATA III interface for direct connection.
Connect the SATA data and power cables, secure the drive in the bay, then power on the system; the controller firmware updates automatically in the background without requiring a reboot.
The MTBF is 2,000,000 hours and the Annualized Failure Rate is 3.2x lower than HDDs, so replacement intervals are significantly extended.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?