XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80GB 2.5" SATA internal SSD with MLC memory, delivering 250MB/s read and 70MB/s write speeds for notebook and desktop upgrades
The Intel X25-M is an 80GB internal solid-state drive built for consumer notebooks and desktops. It uses MLC NAND flash memory and a 2.5-inch form factor that fits standard hard-drive bays. The SATA II interface provides broad compatibility with older and current platforms.
Typical idle power consumption is 75 mW and active power consumption is 150 mW. The drive has no moving parts, so it operates silently and generates minimal heat. It is rated to withstand operating vibration of 2.17G at 5-700 Hz and non-operating vibration of 3.13G at 5-800 Hz.
Sustained sequential read reaches up to 250MBps while sustained sequential write reaches up to 70MBps. TRIM support is included for Windows 7, with the Intel SSD Toolbox providing TRIM for Vista and XP. The MTBF is rated at 1,200,000 hours.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | X25-M |
| Model name | SSDSA2MH080G2K5 |
| Total capacity | 80 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sustained sequential read rate | Up to 250 MB/s |
| Sustained sequential write rate | Up to 70 MB/s |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA II |
| Power | |
| Idle power draw | 75 mW Typical |
| Active power draw | 150 mW Typical |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 9.5 mm |
| Shipping weight | 0.91 kg |
| Package size | 146 × 114 × 44 mm |
| Environment & compliance | |
| Max shock tolerance | 1500G / 0.5 msec |
| Vibration tolerance | Operating: 2.17G (5-700 Hz) Non-operating: 3.13G (5-800 Hz) |
| More details | |
| Mean time between failures | 1,200,000 h |
Mount the 9.5mm high drive in a 2.5" bay, connect the SATA data and power cables, then enable AHCI in the BIOS before installing the OS; skipping AHCI disables TRIM and cuts write speed.
Run the Intel SSD Toolbox periodically to trigger a manual TRIM on Windows Vista or XP; Windows 7 handles TRIM automatically, and the 1,200,000-hour MTBF means no scheduled hardware replacement.
The sustained sequential write ceiling of 70MBps is reached well before the 150mW active power limit or the 1500G shock rating become factors.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?