Intellinet Cat6 U/UTP Slim Patch Cable 14 ft Red 10G 250 MHz 30 AWG

Slim Cat6 patch cable for dense network runs

This 14 ft red Cat6 U/UTP cable uses 30 AWG stranded copper to fit tight cabinets and awkward routes. It targets installers who need a thinner profile than standard patch cords while keeping 10 Gbps capability. The snag-free boots protect the RJ45 clips during frequent moves.

Sustained 10 Gbps throughput at 250 MHz

The pure bare copper conductors meet ISO/IEC 11801 and EN 50288, so the link holds 10 Gbps over the full length without the signal drop-off seen on copper-clad alternatives. Gold-plated contacts resist oxidation that degrades throughput over months of PoE++ loads up to IEEE 802.3bt. The reduced diameter also improves airflow around active gear, helping thermal stability during continuous traffic.

Tool-free install with T568A or T568B wiring

Both ends are pre-terminated to the same colour code, so the cable works straight from the bag in either wiring scheme. The slim jacket bends sharply around 45-degree corners without kinking, yet the heavy-duty strain relief stops the plug from pulling loose. Not suited for outdoor burial or shielded environments that require foil or braid.