Intellinet Network Solutions 7 m LC to SC UPC OM3 Duplex Aqua 50/125 µm BIMMF 2.0 mm 23 ft

7 m LC to SC OM3 Duplex Patch Cable

This 7 m duplex fiber patch cable uses OM3 multimode fiber with 50/125 µm core/cladding and bend-insensitive construction. It terminates in LC and SC connectors with UPC polish for low return loss. The aqua jacket identifies OM3 multimode rating. It is built from Corning ultra-pure glass for low attenuation and high bandwidth in enterprise and data-center links.

Verify Connector Types and Polish

Before ordering, confirm that your patch panels, transceivers or wall outlets accept LC on one end and SC on the other. Ensure the equipment expects UPC polished ferrules rather than APC, as mixing polish types degrades return loss. Check that the 2.0 mm cable diameter fits your cable management and routing constraints.

Test Report and Bend-Insensitive Fiber

Each cable ships with a factory test report documenting insertion loss and return loss, so you can verify performance against your link budget immediately. The bend-insensitive multimode fiber reduces attenuation when cables are routed around tight corners or through dense cable trays, simplifying installation and ongoing maintenance in crowded racks.