Intellinet Network Solutions Cat6 U/UTP Slim Network Ethernet Cable 3 ft Black 10G 250 MHz 30 AWG

Three-foot Cat6 patch cable

This three-foot Cat6 U/UTP patch cable uses 30 AWG stranded copper conductors and gold-plated RJ45 connectors to deliver up to 10 Gbps at 250 MHz. The slim, snag-free design targets installers who need tidy runs in crowded cabinets or around tight corners. It supports all PoE standards up to IEEE 802.3bt and follows T568A or T568B wiring.

Verify port spacing and PoE budget

Check that the ultra-thin jacket fits side-by-side ports on your switch or patch panel without blocking adjacent jacks. Confirm the connected devices and power sourcing equipment stay within the IEEE 802.3bt power budget so the 30 AWG conductors operate within specification. Ensure the run length stays well within the 100 metre channel limit for 10G performance.

Stranded copper with gold contacts

The 100 percent bare copper conductors resist oxidation and maintain conductivity for PoE++ loads, while gold-plated contacts prevent corrosion in humid environments. Snag-free boots protect the latch during repeated insertion and removal, and the heavy-duty strain relief reduces stress on the termination point. The flexible jacket simplifies routing through cable managers and around bends.