Intellinet Network Solutions Cat6a S/FTP Network Ethernet Cable 10 ft White

10 ft Cat6a S/FTP patch cable

This white Cat6a patch cable uses S/FTP construction with overall aluminium braid and per-pair foil shielding to support 10 Gbps data rates at frequencies up to 500 MHz. It is certified to ISO/IEC 11801 and EN 50173-1 Class EA standards and terminated with RJ45 connectors on both ends. The stranded 26 AWG pure bare copper conductors ensure flexibility for patching between devices in a rack or on a desk.

Sustained 10 Gbps throughput with PoE++

Under continuous load the multi-layer shielding suppresses near-end crosstalk and alien crosstalk so the link maintains full 10GBase-T performance without error-rate degradation. Gold-plated contacts rated at 50 micro-inches resist oxidation, keeping resistance low during long PoE++ sessions that deliver up to IEEE 802.3bt power levels. The heavy-duty strain relief and snag-free boots protect the termination points when cables are routed through dense cable managers.

Verify connector wiring and pathway space

Confirm that your existing keystones, patch panels and equipment ports follow the same T568A or T568B pin-out this cable uses; the jacket is colour-coded for both standards. Ensure the pathway can accommodate the slightly larger S/FTP diameter and that bend-radius limits are respected near sharp corners. Buyers needing longer runs or outdoor-rated jackets should look elsewhere, as this cable is a 10 ft indoor patch cord only.