We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 4 m duplex singlemode fiber patch cable with LC UPC connectors on both ends

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF Fiber Cable 4 m LC/LC UPC 9/125 µm G.657.A1 Yellow

SKU CH-M69X-2NBJ3

A 4 m singlemode duplex patch cord with LC/UPC connectors, bend-insensitive G.657.A1 fiber and Corning glass for low-loss 40G links

  • First connectorLC
  • Second connectorLC
  • Product typeFiber
  • Overall length4 m
  • Product colorYellow
  • Key features9/125 µm, Bend Insensitive Fiber Cable G.657.A1
  • Reliable high-speed links with OS2 single-mode fiber
  • Reduced return loss using UPC ultra-physical-contact connectors
  • Maintains signal integrity when bent with G.657.A1 bend-insensitive design
  • Low attenuation and high bandwidth from Corning ultra-pure glass
  • Ready for 40G Ethernet and beyond with low signal loss

Versatile Connectivity for Data Centres

This singlemode duplex patch cable is built for interconnect and cross-connect use in entrance facilities, telecommunications rooms, data centres and at the desk. The 4 m length suits rack-to-rack or desk-to-panel runs. Yellow jacket colour identifies the OS2 singlemode fibre type at a glance. UPC polished LC connectors on both ends provide a superior surface finish and improved return loss.

Bend Insensitive Fibre Reduces Attenuation

Corning ultra-pure glass core delivers low signal loss and high bandwidth for 40G Ethernet links and beyond. G.657.A1 bend insensitive design minimises attenuation when the cable is bent or twisted during routing. Each unit ships with a factory test report confirming insertion loss and return loss performance. OFNR rating allows in-wall and riser installation without additional conduit.

Duplex LC Pair Simplifies Patch Panel Layout

Dual LC connectors enable transmit and receive paths in a single cable assembly, freeing panel ports compared to simplex pairs. 2.0 mm jacket diameter eases routing through dense cable managers and tight trunking. No external shielding means the cable remains lightweight and flexible for frequent re-patching. Buyers needing armoured or outdoor-rated plant cable should select a different construction.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 70% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntellinet Network Solutions
Model nameSinglemode Duplex BIF
Product typeFiber
Product colorYellow
Ports & slots
First connectorLC
Second connectorLC
Size & build
Overall length4 m
ShieldingNo

Questions about this item

How do I install this LC/LC duplex patch cable and what step is often missed?

Clean both LC ferrules with a lint-free wipe and isopropyl alcohol before mating them to the transceivers; the step most often skipped is inspecting the end-faces under a microscope to confirm no contamination remains.

What maintenance or replacement will this cable need over its service life?

Only periodic end-face cleaning and visual inspection are required; the Corning glass and G.657.A1 bend-insensitive design resist fatigue, so the cable itself does not need scheduled replacement.

What is the first limit that appears when this cable runs 40G Ethernet continuously?

The 4 m length keeps insertion loss well within the OS2 budget for 40G, so the practical limit is the transceiver’s optical power budget rather than the cable’s attenuation.

More in Ethernet & LAN Cables

Similar items