We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 5 m duplex fiber patch cable with LC connectors on both ends, 2.0 mm jacket, G.657.A1 bend-insensitive singlemode 9/125 µm

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF LC/LC 5 m Yellow 9/125 µm G.657.A1

SKU CH-5W12-5JXY8

A 5 m single-mode duplex fiber patch cable with bend-insensitive G.657.A1 glass for 40G Ethernet and long-distance links

  • First connectorLC
  • Second connectorLC
  • Product typeFiber
  • Overall length5 m
  • Product colorYellow
  • Key features9/125 µm, Bend Insensitive Fiber Cable G.657.A1
  • Ideal for data-centre and desk interconnects
  • UPC connectors reduce return loss for clearer signals
  • OS2 single-mode fibre supports 40G Ethernet and beyond
  • Bend-insensitive G.657.A1 design cuts attenuation when routed tightly
  • Corning ultra-pure glass core delivers low loss over long distances

Singlemode Duplex BIF LC/LC 5 m

This singlemode duplex patch cable uses 9/125 µm bend-insensitive fiber rated to G.657.A1. It is built for interconnect and cross-connect links in entrance facilities, telecommunications rooms, data centres and desk-side connections. The yellow jacket identifies the singlemode type and the LC/UPC connectors on both ends provide low return loss. Each cable ships with its own test report.

Practical limits of OS2 singlemode and LC/UPC

OS2 singlemode fiber supports low-loss, high-bandwidth transmission suitable for 40G Ethernet and beyond. The bend-insensitive G.657.A1 design reduces attenuation when the cable is routed around tight bends. LC/UPC connectors improve surface finish for better return loss, but the link budget still depends on total length, splice count and connector cleanliness. The 2.0 mm duplex jacket is OFNR rated for riser installation.

What to check before ordering

Verify that your equipment uses LC ports and expects singlemode 9/125 µm fiber with UPC polish. Confirm the 5 m length reaches between your patch panels or transceivers without excess slack. Ensure the OFNR jacket meets local fire-code requirements for the intended pathway. The cable is not suited for multimode networks or angled-polish (APC) interfaces.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 65% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntellinet Network Solutions
Model nameSinglemode Duplex BIF
Product typeFiber
Product colorYellow
Ports & slots
First connectorLC
Second connectorLC
Size & build
Overall length5 m
ShieldingNo

Questions about this item

Should I choose the 5 m or 16 ft length for my rack-to-rack run?

Both figures describe the same cable — 5 metres equals about 16 feet — so pick the unit that matches your documentation.

What does the 40G Ethernet rating mean for my link?

The OS2 singlemode fiber with 9/125 µm core supports 40 Gb/s and higher speeds over long distances with low loss.

How does the G.657.A1 bend-insensitive standard affect installation?

It allows tighter bends down to a 2.0 mm cable diameter without excess attenuation, easing routing in dense panels.

More in Ethernet & LAN Cables

Similar items