Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 10 ft DisplayPort 1.4 cable carrying 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz with a latch-free design
This 10 ft DisplayPort 1.4 cable carries 32.40 Gbit/s bandwidth with HBR3 rating and supports resolutions up to 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz. It connects a DisplayPort source to a DisplayPort display using male-to-male connectors. The nylon-braided jacket and latch-free plugs are rated for over 10000 mating cycles.
It suits PC, laptop, monitor, TV or projector setups that need 8K 60 Hz, 4K high refresh or 1080p 240 Hz over a 10 ft run. It is not for installations that require a longer cable, an angled connector or a plenum-rated jacket. Buyers needing DisplayPort 2.1 bandwidth or USB-C alternate mode should look elsewhere.
The single specification that decides fit is the 32.40 Gbit/s HBR3 bandwidth ceiling. If your source and sink both support DisplayPort 1.4 HBR3 and the 10 ft length reaches, this cable will deliver the listed 8K, 4K and 1080p modes with DSC 1.2 and FEC. If either device only supports HBR2 or lower, the maximum resolution and refresh rate will be limited by that device.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | iXever |
| Model name | DP14C3M (DisplayPort 1.4 Cable 10 ft 3m, iXever Nylon Braided 8K DP to DP Cable (8K@60 Hz, 4K@144 Hz and 1080P@240 Hz), HBR3, 32.4 Gbit/s, HDCP 2.2, HDR Support) |
| Product type | DisplayPort Cable |
| Product color | Black |
| Design style | Displayport |
| Ports & slots | |
| Connector count | 2 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
HBR3 provides 32.4 Gbps total bandwidth and 25.92 Gbps data rate, enabling 8K at 60 Hz, 4K at 144 Hz, 2K at 165 Hz and 1080P at 240 Hz with DSC 1.2 compression when both source and display support those modes.
The 10 ft length and nylon braided jacket add minimal bulk, while the latch-free male connectors release with a straight pull — no squeeze tabs — so the cable routes through standard grommets and sits flush against rear-mounted displays.
No drivers are required; the cable is DisplayPort 1.4 compliant and backwards compatible with 1.3, 1.2 and 1.1. Your GPU and monitor must each support DisplayPort 1.4 and the target resolution or refresh rate for the link to negotiate 4K 144 Hz.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?