STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts Bluetooth 5.0, optical and USB digital audio to analogue RCA and 3.5 mm outputs with a 125 mW headphone amp at 192 kHz 24-bit
The Jansicotek unit converts digital audio from Bluetooth 5.0, USB storage or SPDIF optical sources into analogue stereo through RCA and 3.5mm outputs. A built-in headphone amplifier delivers 125mW per channel into 32ohm loads, so listeners can plug in directly without a separate amp.
The DAC supports sampling rates of 32, 44.1, 48, 96 and 192KHz at 24bit depth over optical and coaxial inputs, and only accepts PCM or LPCM formats. If your source outputs Dolby Digital, DTS or multichannel bitstreams, this converter will not decode them.
Power comes from the included USB cable, so a spare USB port or 5V charger is required. The front-panel volume knob controls both line and headphone levels simultaneously, freeing you from hunting for a remote, though an IR handset is also supplied for distance adjustments.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Digital to Analog Audio Converter |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| First connector | 1 x SPDIF & USB & Bluetooth Receiver Input |
| Second connector | 1 x L/R RCA & 3.5 mm Audio Jack Output |
| In the box | |
| In the box | 1 x Digital to analog audio converter 1 x USB power cable 1 x IR Remote Control 1 x User Manual |
The built-in DAC chip handles up to 192 kHz at 24-bit depth, so high-resolution optical or USB files are decoded to analogue RCA and 3.5 mm outputs without down-sampling.
Bluetooth 5.0 receives the stream, then the internal DAC converts it to analogue at the same 192 kHz / 24-bit capability used by the optical and USB inputs.
The amplifier is rated 125 mW per channel at 32 ohms and is designed for headphones between 16 and 300 ohms.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?