We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft DisplayPort 2.1 cable with aluminium connectors, male to male

Jansicotek

Jansicotek A0108 DisplayPort 2.1 cable 10 ft 80Gbps

SKU CH-KMJF-MH3TQ

DisplayPort 2.1 cable carries 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz over 10 ft with 80 Gbps bandwidth

  • Refresh frequency16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 H
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort2.1
  • Destination connector1 x DisplayPort2.1

Cable Length 10 Feet

  • 80Gbps bandwidth enables 16K@60Hz, 8K@120Hz and 4K@240Hz
  • Triple-shielded solid copper conductor resists EMI for stable high-speed signals
  • Premium aluminium shell dissipates heat during extended gaming sessions
  • 15,000+ bend lifespan withstands frequent setup changes
  • Backward compatible with DP1.4 and DP1.2 devices

DisplayPort 2.1 cable for 16K workflows

This 10 ft Jansicotek A0108 cable carries DisplayPort 2.1 signals at up to 80 Gbps. It supports 16K at 60 Hz with DSC, 8K at 120 Hz and 4K at 240 Hz. The male-to-male connectors are housed in aluminium shells and the conductors are solid copper with triple shielding.

Suited to high-refresh gaming

Gamers driving 4K 240 Hz or 2K 360 Hz panels and creators needing 8K 120 Hz or 16K 60 Hz output will use the full bandwidth. Users whose monitors and graphics cards only support earlier DisplayPort versions will not reach these resolutions or refresh rates.

80 Gbps bandwidth decides the use case

The cable is rated for 80 Gbps, enabling the listed 16K, 8K and high-refresh 4K modes when both source and sink implement DisplayPort 2.1. If either end is limited to an older DisplayPort version the available bandwidth drops to that version's ceiling.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 60% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameA0108
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 Hz/120 Hz/144 Hz Support
Ports & slots
Connector count1
Source connector1 x DisplayPort2.1
Destination connector1 x DisplayPort2.1
Connector detailsDisplayPort to DisplayPort 2.1 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 10 ft length or a shorter cable for my desk setup?

The 10 ft cable reaches across most desks without strain; choose a shorter run only if you need less slack to keep routing tidy.

What does the 80 Gbps rating mean when I plug this into my GPU and monitor?

It lets the link carry 16K at 60 Hz with DSC, 8K at 120 Hz, or 4K at 240 Hz without compression artefacts, provided both ends support those modes.

Is the DisplayPort 2.1 interface backward compatible with my DP 1.4 graphics card?

Yes, the cable works with DP 1.4 and DP 1.2 ports, but the link will run at the older standard’s maximum bandwidth and resolution limits.

More in DisplayPort Monitor Cables

Similar items