STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts YPbPr component and analogue audio to HDMI 1.4 at 1080p 60 Hz for DVD, Xbox 360, PS2 and N64
The Jansicotek Component YPbPr 5RCA to HDMI Audio Video Converter bridges analogue component sources such as DVD players, Xbox 360, PS2 and N64 to modern HDMI displays. It accepts YPbPr or RGB video plus two-channel LPCM audio and outputs a single HDMI signal up to 1080P at 60 Hz. The unit requires the included 5V/1A DC power supply to operate.
The converter draws minimal power from the supplied 5V/1A adapter and runs without fans, so it adds no audible noise to a living-room setup. Input video amplifier bandwidth is rated at 1.65 Gbps, supporting standard component resolutions including 480i/p, 576i/p, 720p and 1080i/p at both 50 Hz and 60 Hz. HDMI 1.4 compliance with HDCP 1.4 ensures stable handshake with contemporary monitors and projectors.
One 5RCA block carries component video and stereo audio in; a single HDMI port carries the combined digital stream out. The design is not reversible, so it cannot convert HDMI back to component. Fixed connectors mean no cable swapping is needed once installed, but the short captive leads require the converter to sit close to the source device or display.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Component to HDMI Converter, YPbPr to HDMI Converter |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| First connector | 1 x YPbPr 5RCA |
| Second connector | 1x HDMI |
| In the box | |
| In the box | 1x YPbPr to HDMI Converter 1x 5 V/1A DC Power Supply 1x User Manual |
Connect the five YPbPr RCA cables to the source, attach the HDMI cable to the display, then plug in the included 5V/1A power supply; the step most users skip is powering the unit before expecting a picture.
No user-serviceable parts are inside; only the external 5V/1A power adapter may need replacement if it fails after extended use.
The input video amplifier bandwidth of 1.65 Gbps caps the maximum supported resolution at 1080p/60 Hz, so higher resolutions cannot be passed through.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?