We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver DisplayPort 1.4 cable with male connectors on both ends, 10 ft long

Jansicotek

Jansicotek DP28 DisplayPort 1.4 cable 10 ft 32.4 Gbps Silver

SKU CH-9PGF-TQVB4

A 10 ft DisplayPort 1.4 cable delivering 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR and HDCP 2.2 support

  • Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 H
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector detailsDisplayPort to DisplayPort( Male to Male)

Cable Length 10 Feet

  • Delivers 8K at 60 Hz with 32.4 Gbps bandwidth
  • Drives 4K at 144 Hz and 2K at 240 Hz for smooth gaming
  • VESA certified cable ensures reliable DisplayPort 1.4 performance
  • Triple-shielded 30 AWG tinned copper resists signal interference
  • 24K gold-plated connectors and nylon braid extend cable life

Jansicotek DP28 DisplayPort 1.4 Cable 10 ft

This 10 ft DisplayPort 1.4 cable connects a graphics card to a monitor with a male-to-male link. It supports up to 32.4 Gbps bandwidth for 8K at 60 Hz, 5K at 60 Hz, 4K at 144 Hz, 2K at 240 Hz and 1080p at 240 Hz. The cable is VESA certified and backward compatible with DisplayPort 1.3, 1.2 and 1.1. It suits gamers and creators who need high refresh rates at high resolutions.

Plug-and-play installation with latch connectors

The connectors feature latches that click into place; press the release button to unplug without forcing the port. Triple shielding and 30 AWG tinned copper conductors reduce interference on the 10 ft run. A common issue is leaving the latch engaged while pulling, which can damage the port or the cable head. Route the nylon-braided jacket away from sharp edges to prevent sheath wear.

Verify source and display capabilities before

Confirm your graphics card and monitor both have DisplayPort 1.4 ports to use the full 32.4 Gbps link. Check that your monitor’s target resolution and refresh rate appear in the supported list: 8K 60 Hz, 5K 60 Hz, 4K 144 Hz, 2K 240 Hz or 1080p 240 Hz. Ensure your GPU drivers are current for DSC 1.2a and HDR metadata pass-through. This cable does not convert to HDMI, so it will not work if either device lacks a native DisplayPort input.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 57% of the 3,804 comparable items (median $15.99).
Refresh frequency 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameDP28
Product typeDisplayPort
Product colorSilver
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the cable is delivering 8K at 60 Hz after connecting it?

In your OS display settings verify the output shows 7680x4320 at 60 Hz and that HDR is active; a compatible monitor OSD will also report the active resolution and refresh rate.

What comes in the box and do I need any extra adapters for a standard DisplayPort 1.4 monitor and GPU?

The package contains the 10 ft male-to-male DisplayPort 1.4 cable only; no adapters are required for native DisplayPort 1.4 ports on both ends.

Which version should I choose if my monitor runs 4K at 144 Hz and my GPU supports HBR3?

This DP28 model is rated for 32.4 Gbps HBR3 bandwidth and covers 4K at 144 Hz, so it matches that requirement directly.

More in DisplayPort Monitor Cables

Similar items