We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek TJ-A033 DisplayPort 1.4 cable 16.4 ft 8K@60Hz HDR

SKU CH-QHFH-9YDW6

Connects DisplayPort 1.4 devices at 16.4 ft with HBR3 bandwidth up to 32.4 Gbit/s for 8K at 60 Hz, 4K at 144 Hz and HDR

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length16.4 ft (5 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 16.4 Feet

  • 8K resolution at 60 Hz for ultra-sharp visuals
  • 4K at 144 Hz and 2K at 240 Hz for fluid gaming motion
  • 4 Gbit/s HBR3 bandwidth handles high-resolution high-refresh signals
  • Triple shielding with solid copper conductors preserves signal integrity over 16.4 ft
  • VESA-certified DisplayPort 1.4 with HDCP 2.2 and HDR support

16.4 ft DisplayPort 1.4 cable for 8K@60Hz

This 16.4 ft DisplayPort 1.4 cable connects a DisplayPort source to a DisplayPort display. It is built for users who need long-distance 8K@60Hz or high-refresh 4K and 2K signals without an active extender. The male-to-male connectors fit graphics cards and monitors with standard DisplayPort ports.

VESA certification and HBR3 bandwidth

The cable carries VESA certification for DisplayPort 1.4 and meets the HBR3 rating of 32.4 Gbit/s. That bandwidth enables 8K@60Hz, 4K@144Hz, 2K@240Hz and 1080p@240Hz with HDR, HDCP 2.2, DSC 1.2 and Forward Error Correction. Multi-stream transport and stereoscopic 3D are also supported.

Triple-shielded copper with gold connectors

Solid copper conductors and triple shielding protect signal integrity over the full 16.4 ft run. The 24K gold-plated connectors resist corrosion and ensure reliable contact. A nylon braid adds abrasion resistance and keeps the cable supple for routing behind desks or through conduit. Not suited for runs longer than 16.4 ft or for HDMI-only devices.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 57% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length16.4 ft (5 m)
Cable length16.4 ft (5 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Will the 24 K gold-plated connectors on this 16.4 ft DisplayPort 1.4 cable need periodic cleaning or replacement?

The gold-plated connectors resist oxidation and do not require scheduled cleaning or replacement under normal indoor use.

At 16.4 ft, what bandwidth ceiling will the HBR3-rated solid-copper cable hit first during sustained 8K@60 Hz HDR streaming?

The cable is rated for the full HBR3 bandwidth of 32.40 Gbit/s, so the 32.4 Gbps ceiling is the first limit encountered at 8K@60 Hz with HDR.

Does the triple-shielded, nylon-braided construction produce noticeable heat or coil whine when driving 4K@144 Hz all day?

The passive copper design generates no audible noise and only negligible warmth; the braided jacket and triple shielding are for signal integrity, not active cooling.

More in DisplayPort Monitor Cables

Similar items