We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray DisplayPort 1.4 cable with male connectors on both ends, 16.4 ft long

Jansicotek

Jansicotek DP28 DisplayPort 1.4 cable 16.4ft Gray

SKU CH-YPT2-SPXTH

A 16.4 ft DisplayPort 1.4 cable supporting 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with 32.4 Gbps bandwidth

  • Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 H
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector detailsDisplayPort to DisplayPort( Male to Male)

Cable Length 16.4 Feet

  • Delivers 8K resolution at 60Hz for ultra-sharp visuals
  • Supports 4K at 144Hz and 2K at 240Hz for fluid gaming
  • Provides 32.4Gbps bandwidth via HBR3 for high-speed data transfer
  • Features 30AWG tinned copper with triple shielding for stable signals
  • Offers 16.4ft length with nylon braid for flexible, durable connections

Jansicotek DP28 DisplayPort 1.4 cable 16.4ft

This 16.4ft DisplayPort 1.4 male-to-male cable carries up to 32.4Gbps bandwidth. It supports 8K at 60Hz, 4K at 144Hz, 2K at 240Hz and 1080P at 240Hz with Dynamic HDR and HDCP 2.2. The link is VESA certified and backward compatible with DisplayPort 1.3, 1.2 and 1.1.

Suits 8K 60Hz or 4K 144Hz single-link setups.

Gamers and creators driving one high-refresh monitor from a DP 1.4 source get full HBR3 performance. Builders needing longer runs for multi-monitor walls or dual-link 8K configurations should consider active fibre alternatives.

HBR3 32.4Gbps bandwidth decides fit

The cable is rated for HBR3 at 32.4Gbps, enabling the listed 8K, 4K and 2K refresh rates over a single DisplayPort 1.4 connection. If your source or sink tops out at HBR2 the extra headroom goes unused, but the cable still works.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 3,804 comparable items (median $15.99).
Refresh frequency 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameDP28
Product typeDisplayPort
Product colorGray
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

What DisplayPort version must my graphics card and monitor both support to use this cable at its full 32.4 Gbps bandwidth?

Both the graphics card and the monitor need a DisplayPort 1.4 port to reach the 32.4 Gbps HBR3 rating.

Will this cable work with my older DisplayPort 1.2 monitor without losing the 4K 60 Hz signal?

Yes, the cable is backward compatible with DisplayPort 1.2 and 1.3, so 4K at 60 Hz will pass through normally.

How can I verify the cable is delivering 8K 60 Hz after I connect it?

Open your GPU control panel or monitor OSD and confirm the active resolution reads 7680 × 4320 at 60 Hz with HDR enabled.

More in DisplayPort Monitor Cables

Similar items