We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon-braided DisplayPort 1.4 cable 16.4 ft with gold male connectors

Jansicotek

Jansicotek TJ-A033 DisplayPort 1.4 cable 16.4 ft

SKU CH-P432-7MA9Z

Connects DisplayPort 1.4 devices at 16.4 ft with HBR3 bandwidth up to 32.4 Gbps for 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length16.4 ft (5 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 16.4 Feet

  • VESA-certified 8K@60Hz clarity for future-proof displays
  • 4 Gbps HBR3 bandwidth drives 4K@144Hz and 2K@240Hz gaming
  • Triple-shielded solid copper with 24K gold connectors resists interference
  • Nylon-braided 16.4 ft length reaches distant monitors cleanly
  • Supports HDR, DSC 1.2, MST and 32 audio channels

16.4 ft VESA Certified DP 1.4 Cable

This 16.4 ft DisplayPort 1.4 cable carries VESA certification and HBR3 bandwidth up to 32.4 Gbit/s. It connects a DisplayPort 1.4 source to a DisplayPort 1.4 display using male-to-male gold-plated connectors. The nylon-braided jacket protects triple-shielded solid copper conductors for stable signal transmission.

Who this suits and who should look elsewhere

The length suits setups where the PC sits far from the monitor, such as home-theatre PCs or wall-mounted displays. It handles 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz with HDR, DSC 1.2 and MST. Buyers needing a shorter cable for a tidy desk or a 2 m maximum run should choose a different length.

Deciding specification — HBR3 32.4 Gbit/s bandwidth

The single figure that decides fit is the HBR3-rated 32.4 Gbit/s bandwidth. It enables every listed resolution and refresh rate combination, including 8K 60 Hz, 4K 144 Hz and 1080p 240 Hz, plus 32 audio channels and Forward Error Correction. If your hardware requires less bandwidth, a lower-rated cable will also work.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length16.4 ft (5 m)
Cable length16.4 ft (5 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does my graphics card need a DisplayPort 1.4 output to use the 8K@60Hz capability of this 16.4 ft cable?

Yes, the source must provide a DisplayPort 1.4 signal with HBR3 bandwidth to deliver 8K at 60 Hz; earlier DP versions will fall back to lower resolutions or refresh rates.

Will this 16.4 ft DisplayPort 1.4 cable work with my older DisplayPort 1.2 monitor without signal loss?

The cable is backward compatible with DisplayPort 1.2 and 1.1, so it will carry 4K@60Hz or 1080p@240Hz from a 1.2 source, but 8K@60Hz requires a 1.4 port on both ends.

How can I confirm the cable is running at the full 32.4 Gbps HBR3 rate after I connect it?

Check the monitor’s on-screen display or GPU control panel; they should report the link at HBR3 and show the target resolution and refresh rate such as 8K@60Hz or 4K@144Hz.

More in DisplayPort Monitor Cables

Similar items