We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey DisplayPort 1.4 cable with male connectors on both ends, ten feet long

Jansicotek

Jansicotek DP28 DisplayPort cable 1.4 Grey 10ft

SKU CH-P8YZ-JP3XF

VESA certified DisplayPort 1.4 cable supports 8K at 60Hz, 4K at 144Hz and 2K at 240Hz over 10ft with 32.4Gbps bandwidth

  • Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 H
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector detailsDisplayPort to DisplayPort( Male to Male)

Cable Length 10 Feet

  • VESA certified cable guarantees reliable 8K 60 Hz output
  • 4 Gbps HBR3 bandwidth drives 4K 144 Hz and 2K 240 Hz gaming
  • Triple shielded 30 AWG tinned copper resists interference for stable signal
  • 24 K gold male-to-male connectors with nylon braid extend durability
  • Backward compatible with DisplayPort 1.1 1.2 1.3 for wide device support

What this cable is

The Jansicotek DP28 is a VESA-certified DisplayPort 1.4 cable with male-to-male connectors in grey. It carries up to 32.4 Gbps bandwidth and supports resolutions including 8K at 60 Hz, 5K at 60 Hz, 4K at 144 Hz, 2K at 240 Hz and 1080p at 240 Hz with Dynamic HDR and HDCP 2.2. The 10 ft length suits desktop setups where the source and display sit further apart.

Who should use it and who should not

Gamers and creators driving high-refresh 4K or 1440p monitors, or 8K displays at 60 Hz, will get the full link capability. Builders who need a longer run than 10 ft, an angled connector for tight backs, or a DisplayPort-to-HDMI adapter cable should look at a different product.

The specification that decides fit

The cable is rated for HBR3 at 32.4 Gbps, which is the single figure that determines whether your graphics card and monitor can negotiate their highest supported resolution and refresh rate over this link.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameDP28
Product typeDisplayPort
Product colorGrey
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

Do I need a graphics card and monitor that both have DisplayPort 1.4 ports to use this cable?

Yes, the cable connects a DisplayPort 1.4 source to a DisplayPort 1.4 display using male-to-male connectors.

Will this cable work with my older DisplayPort 1.2 monitor if I keep it?

The cable is backward compatible with DisplayPort 1.3, 1.2 and 1.1, so it will function with your older monitor.

How can I confirm the cable is delivering 8K at 60 Hz after I connect it?

Check your display settings to verify the active resolution shows 7680x4320 at 60 Hz and that HDR is enabled.

More in DisplayPort Monitor Cables

Similar items