We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey DisplayPort 1.4 cable with male connectors on both ends, 6.6ft length

Jansicotek

Jansicotek DP28 displayport cable 1.4 grey 6.6ft

SKU CH-JB2X-NMMKJ

VESA certified DisplayPort 1.4 cable supports 8K at 60Hz and 4K at 144Hz with 32.4Gbps bandwidth

  • Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 H
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector detailsDisplayPort to DisplayPort( Male to Male)

Cable Length 6.6 Feet

  • VESA certified cable ensures compliant 8K 60 Hz signal
  • 4 Gbps HBR3 bandwidth drives 4K 144 Hz and 2K 240 Hz gaming
  • Dynamic HDR and HDCP 2.2 deliver protected high-dynamic-range colour
  • 30 AWG tinned copper with triple shielding resists interference
  • 24 K gold male-to-male connectors and nylon braid extend cable life

VESA certified DisplayPort 1.4 cable

This VESA certified DisplayPort 1.4 cable carries 32.4 Gbps HBR3 bandwidth for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz. Male-to-male connectors link a graphics card or laptop directly to a monitor or projector. Grey nylon braid and 24 K gold-plated ends resist wear and interference. It suits gamers, creators and multi-display professionals who need certified high-refresh performance.

Build integration and cable management

The 6.6 ft length reaches across typical desk or wall-mounted setups without excess slack. Triple shielding and 30 AWG tinned copper keep the signal stable near power bricks or other cables. Backward compatibility with DisplayPort 1.3, 1.2 and 1.1 lets you reuse the cord on older ports. Plug-and-play operation requires no driver installation, freeing a USB or HDMI port for peripherals.

Resolution headroom and practical limits

Certified throughput handles 8K 60 Hz HDR, 5K 60 Hz, 4K 144 Hz and 1080p 240 Hz with Dynamic HDR and HDCP 2.2. DSC 1.2a and forward error correction preserve quality at the highest rates. The cable does not carry HDMI signals, so DisplayPort-only sources and sinks are required. It will not support resolutions or refresh rates beyond the listed 32.4 Gbps ceiling.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameDP28
Product typeDisplayPort
Product colorGrey
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequency8K@60 Hz, 5K@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 2K@165 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

Will the 32.4Gbps bandwidth hold steady during long gaming sessions?

The cable is HBR3 rated for 32.4Gbps bandwidth and uses 30AWG tinned copper with triple shielding to maintain stable signal transmission over the 6.6ft length.

Does the cable get warm or draw extra power when running 4K at 144Hz all day?

It is a passive copper cable with gold-plated connectors and nylon braiding for heat dissipation; it draws no external power and runs cool under sustained high-refresh use.

Do I need a graphics card and monitor that both have DisplayPort 1.4 ports to use this cable?

Yes, the cable is male-to-male DisplayPort 1.4 and requires a DP 1.4 source and a DP 1.4 display to achieve 8K@60Hz or 4K@144Hz.

More in DisplayPort Monitor Cables

Similar items