STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a single HDMI input into two SDI outputs at up to 1080p 60 Hz with automatic audio format detection
The Jansicotek converter transforms a single HDMI source into two identical SDI streams for broadcast or surveillance workflows. It accepts 1080p at 24, 25, 30, 50 and 60 Hz plus common 720p and PC resolutions, making it suitable for camera feeds, CCTV recorders or professional monitors that require SDI connectivity.
A single HDMI Type A input feeds two SDI outputs, allowing one source to drive dual displays or a recorder and a monitor simultaneously. The unit ships with a dedicated power adapter and operates as a compact plug-and-play module that can be tucked behind equipment racks or camera rigs without blocking adjacent ports.
Conversion is strictly one-way from HDMI to SDI; the device cannot pass SDI signals back to an HDMI display. Output formats are limited to 720p at 50 or 60 Hz and 1080p at the listed frame rates, so higher resolutions such as 4K or frame rates beyond 60 Hz are not supported. The interface runs at 2.970 Gbit/s, matching standard 3G-SDI bandwidth.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI to SDI Converter |
| Ports & slots | |
| First connector | 1 x HDMI input |
| Second connector | 2 x SDI output |
| In the box | |
| In the box | 1 x HDMI to SDI Converter 1 x Power Adapter 1 x Uuse Manual |
The converter outputs HD-SDI and 3G-SDI at 720p 50/60 Hz and 1080p 24/25/30/50/60 Hz, matching the 2.970 Gbit/s ceiling.
A power adapter ships in the box and plugs into the converter's DC jack; no separate supply is required.
Connect HDMI source to the input, link both SDI outputs to displays, attach the supplied power adapter, then power on the source — skipping the power step leaves the unit inactive.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?