Jansicotek OZJ4 4x4 HDMI matrix video switch

4x4 HDMI matrix switch for multi-source routing

This Jansicotek OZJ4 unit connects four HDMI sources to four displays in any combination. It handles 4K@60Hz signals with 18.5Gbps bandwidth and HDCP 2.2 compliance. Installers and AV integrators use it to route consoles, PCs or media players to multiple screens or projectors without re-cabling. It is not suited for setups needing more than four inputs or outputs.

EDID extractor and IR remote change daily operation

The built-in EDID learning function reads connected displays or loads pre-programmed tables so sources output the correct resolution automatically. A supplied IR remote switches inputs per output from across the room, removing the need for front-panel buttons. After EDID changes a power-cycle of the matrix is required. No software utility or network control is included.

Compact metal chassis

The black enclosure measures 230*90*25mm and weighs 11.9 ounces, fitting on a shelf or in a shallow rack tray. All four inputs and four outputs sit on the same side, keeping cable runs tidy and visible. Maximum certified cable length is 8m with AWG26 HDMI 2.0b leads; longer runs may need active cables or fibre extenders not supplied.