Jansicotek OZQ7 4x1 HDMI Audio Switch ARC 4K@60Hz

Four-input HDMI switch with ARC

The Jansicotek OZQ7 accepts four HDMI sources and routes one signal to a display at up to 4K@60Hz with 18.5Gbps bandwidth. It extracts audio through Toslink, coaxial and 3.5mm jack outputs while the HDMI output supports audio return channel. The unit handles 480i through 1080p@60Hz and 4K@20/30/60Hz with 24, 30 or 36-bit deep colour and HDCP 1.4 compliance. An IR remote and 5V/1A power adapter are included.

Passive operation with external power

The switch draws power from the supplied 5V/1A adapter and adds no active cooling, so it runs silently in normal use. Maximum bandwidth per channel is 300MHz with a 10.2Gbps baud rate, supporting Dolby True-HD, DTS-HD, AC3, DTS and DSD pass-through without decoding. HDMI 2.0 cables up to 3 metres are supported at 4K@60Hz, extending to 5 metres at 4K@30Hz. The compact chassis measures 5.91 x 2.36 x 0.79 inches and weighs 11.9 ounces.

Simple integration for multi-source setups

Connect up to four devices such as a PC, streaming box, Blu-ray player or console to the four HDMI inputs, then run a single HDMI cable to the display. Audio can be sent to a soundbar or receiver via Toslink or coaxial with ARC support, while the 3.5mm jack provides a separate stereo extract. The switch is not compatible with DVI signals, so HDMI-to-DVI cables should not be used. Buyers who need more than four inputs or HDMI 2.1 features will need a different solution.