We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek TJ-A013 DisplayPort 1.4 fiber cable 100ft

SKU CH-3VW4-C9FP0

Unidirectional fiber-optic DisplayPort 1.4 cable carries 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz over 100 ft with VESA certification and 32.4 Gbps bandwidth

  • Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@
  • Rated speedSupports 32.4 Gbit/s of bandwidth
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male
  • Product typeDisplayPort Cable
  • VESA-certified DisplayPort 1.4 fibre link guarantees 8K 60 Hz clarity
  • 4 Gbps HBR3 bandwidth drives 4K 144 Hz and 2K 240 Hz gaming
  • Unidirectional 100 ft optical path eliminates signal loss over long runs
  • Gold-plated connectors with zinc-alloy shells resist wear and cracking
  • DSC 1.2 compression keeps HDR detail intact at maximum refresh rates

What this cable does

The Jansicotek TJ-A013 is a unidirectional fiber-optic DisplayPort 1.4 cable measuring 100ft. It carries 32.4 Gbps of bandwidth and supports 8K at 60Hz, 4K at 144Hz and 1080P at 240Hz. Gold-plated connectors and a zinc-alloy shell protect the terminations. VESA certification confirms compliance with the DP 1.4 specification.

Who should use it and who should not

Builders routing a signal over long distances between a GPU and a display will benefit from the fiber construction that avoids signal loss. The cable is directional, so the Source end must connect to the graphics card and the Display end to the monitor. Installers who cannot observe the marked orientation or who need a short passive copper link should choose a different cable.

The specification that decides fit

The single critical parameter is the 100ft length combined with fiber-optic transmission. Only a fiber cable can deliver full DisplayPort 1.4 bandwidth at this distance without degradation. If the run is shorter or the required bandwidth is lower, a standard copper cable will be simpler and less costly.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $70.99
Pricier than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A013
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedSupports 32.4 Gbit/s of bandwidth
Display
Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 1080P@240 Hz
Ports & slots
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

What does the 32.4 Gbps bandwidth mean for my gaming monitor?

The 32.4 Gbps bandwidth carries 8K at 60 Hz or 4K at 144 Hz without compression, so high-refresh 4K panels run at full speed and HDR metadata passes through untouched.

How does the DisplayPort 1.4 interface limit what I can run?

DisplayPort 1.4 caps at HBR3 32.4 Gbps, enabling 8K 60 Hz and 4K 144 Hz with DSC 1.2, but it cannot reach the higher rates that DisplayPort 2.0 would allow.

What do I need to check so the 100 ft cable fits my setup?

The cable is unidirectional — plug the Source end into the GPU or laptop and the Display end into the monitor — and each male DisplayPort 1.4 connector needs a standard full-size port.

More in DisplayPort Monitor Cables

Similar items