We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with gold-plated connectors and zinc alloy shells, 164ft fiber optic length

Jansicotek

Jansicotek TJ-A013 DisplayPort Cable 164ft 8K 60Hz 4K 144Hz VESA Certified

SKU CH-8PYJ-0FXH6

A 164 ft fiber-optic DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz with VESA certification and 32.4 Gbps bandwidth

  • Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@
  • Rated speedSupports 32.4 Gbit/s of bandwidth
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male
  • Product typeDisplayPort Cable

Cable Length 164 ft.

  • VESA-certified DP 1.4 cable guarantees 8K 60 Hz and 4K 144 Hz performance
  • 164 ft optical fibre delivers 32.4 Gbps uncompressed signal with zero quality loss
  • 24 K gold-plated zinc-alloy connectors resist wear and ensure reliable contact
  • Directional Source/Display plugs prevent hookup errors for VR headsets and monitors
  • HDR10 and HDCP 2.2 support enable protected 8K 60 Hz and 4K 120 Hz content playback

164 ft VESA-Certified DP 1.4 Cable

This 164 ft DisplayPort 1.4 fibre-optic cable carries 8K at 60 Hz and 4K at 144 Hz over long runs without signal loss. It suits VR headsets, projectors or distant monitors where copper cables fall short. The link is rated for 32.4 Gbps and supports HDR10 and HDCP 2.2.

Zinc-Alloy Shell and Directional Connectors

Gold-plated contacts sit inside a zinc-alloy housing with a piano-paint finish that resists cracking. A single Al-Mylar foil shield wraps the four-core optical fibre for stable transmission. The cable is directional: the Source plug goes to the GPU or PC, the Display plug to the monitor or headset.

Check Port Version and Cable Routing

Verify that both source and display have full-size DisplayPort 1.4 sockets; older ports will work but limit resolution and refresh rate. Ensure the 164 ft length can be routed without sharp bends or tight loops that could damage the optical fibre. Confirm the directional labels before pulling the cable through walls or conduit.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $77.99
Pricier than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A013
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedSupports 32.4 Gbit/s of bandwidth
Display
Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 1080P@240 Hz
Ports & slots
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

What bandwidth does the DisplayPort 1.4 interface on this cable cap at in practice?

The cable supports 32.4 Gbps of bandwidth, which is the HBR3 ceiling for DisplayPort 1.4.

What physical clearance does the zinc-alloy connector need at the source and display ends?

Each end uses a standard male DisplayPort 1.4 plug; allow room for the zinc-alloy shell and the 4-core optical fibre behind it.

How is the directional cable installed, and which step do people often reverse?

Connect the plug marked "Source" to the PC or graphics card and the plug marked "Display" to the monitor or projector; reversing them breaks the signal.

More in DisplayPort Monitor Cables

Similar items