We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with male connectors on both ends, fifty feet long, fibre-optic hybrid construction, TPE jacket

Jansicotek

Jansicotek TJ-A022 DisplayPort cable 50 ft 8K 60Hz 4K 144Hz 32.4Gbps

SKU CH-BB5J-F4N62

A 50 ft fibre-optic DisplayPort 1.4 cable delivers 8K at 60 Hz and 4K at 144 Hz with 32.4 Gbps bandwidth

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length50 ft (15.2 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 50 Feet

  • Reliable 50 ft signal reach with hybrid fiber-copper construction
  • 8K 60 Hz and 4K 144 Hz video on a single cable
  • 4 Gbps bandwidth for uncompressed high-resolution content
  • 24 K gold-plated connectors resist corrosion for lasting contact
  • TPE jacket and triple shielding protect the cable during in-wall runs

50 ft fibre-optic DisplayPort 1.4 cable

The Jansicotek TJ-A022 is a 50 ft fibre-optic DisplayPort 1.4 cable with male-to-male connectors. It uses a hybrid glass-fibre and copper construction to deliver up to 32.4 Gbps bandwidth over long distances without signal loss. Gold-plated terminals and a TPE jacket add durability for in-wall installation. The cable carries both video and audio between a source and a display.

Suited for long-run 8K or high-refresh 4K setups

This cable suits installers and enthusiasts who need 8K at 60 Hz or 4K at 144 Hz across a 15 m route where copper cables fail. It supports HDR10, HDCP 2.2 and DSC 1.2 for modern graphics cards and projectors. Buyers who only need a short desk connection or who require a version other than DisplayPort 1.4 should look elsewhere. The fixed 50 ft length also makes it unsuitable for shorter runs.

32.4 Gbps HBR3 bandwidth decides fit

The single specification that determines compatibility is the 32.4 Gbps HBR3 bandwidth rating. It enables 8K 7680×3840 at 60 Hz and 4K 3840×2160 at 144 Hz with DSC 1.2 compression. If the source or display cannot operate at HBR3 speeds, the cable will fall back to lower rates but the extra headroom will not be used. Verify that both ends support DisplayPort 1.4 HBR3 before purchase.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $51.99
Pricier than about 82% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A022
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length50 ft (15.2 m)
Cable length50 ft (15.2 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the 50 ft fiber-optic cable need external power or get warm during all-day 8K 60 Hz use?

The hybrid glass-fiber and copper construction carries the 32.4 Gbps signal without external power and produces no noticeable heat during continuous operation.

What must my source and display each provide for this male-to-male DisplayPort 1.4 cable to work?

Both devices need a standard DisplayPort 1.4 output or input; the cable plugs directly into those ports with no adapters or driver installation required.

Will the 50 ft length still deliver 4K 144 Hz to my older GPU that only supports HBR2?

Yes, the cable is backward compatible with HBR2 and lower link rates, so a GPU limited to 4K 60 Hz will still receive a stable signal at its maximum capability.

More in DisplayPort Monitor Cables

Similar items