Jansicotek TJ-A022 DisplayPort cable 16 ft

16 ft DisplayPort 1.4 fiber cable

This 16 ft fiber-optic DisplayPort 1.4 cable carries up to 32.4 Gbps between a graphics card or laptop and a monitor, projector or HDTV. It supports 8K at 60 Hz and 4K at 144 Hz while remaining backward compatible with 2K and 1080P resolutions. The hybrid glass-fiber and copper construction eliminates electromagnetic interference over long runs. Gold-plated male-to-male connectors resist corrosion for a reliable link.

Check your ports and resolution needs

Verify that both source and display have full-size DisplayPort 1.4 sockets, as this cable uses male-to-male 20-pin connectors only. Confirm the host GPU can drive 8K at 60 Hz or 4K at 144 Hz over HBR3 before expecting those modes. Ensure your content and operating system support HDR10, HDCP 2.2 and DSC 1.2 if you plan to use those features. The 16 ft length suits in-wall or cross-room installs where copper cables would exceed 33 ft limits.

Sustained 8K and high-refresh 4K throughput

Fiber conductors maintain the full 32.4 Gbps bandwidth continuously without the signal decay seen in long copper cables during extended gaming or video sessions. The triple-shielded, TPE-jacketed design resists heat build-up and physical stress inside walls. HBR3 certification means each of the four lanes holds 8.1 Gbit/s steadily, so 7680×3840 at 60 Hz or 3840×2160 at 240 Hz remain stable for hours. No active electronics in the heads require external power, so the link stays live through sleep and wake cycles.