We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 1.4 cable with gold connectors, 6.6ft length

Jansicotek

Jansicotek TJ-A044 DisplayPort 1.4 cable 6.6ft 32.4 Gbps 8K 60Hz braided

SKU CH-A7PZ-S0VT4

Connects DisplayPort 1.4 devices at 32.4 Gbps for 8K 60 Hz, 4K 144 Hz or 1080p 240 Hz with a braided 6.6 ft male-to-male cable

  • Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@
  • Rated speedSupports 32.4 Gbit/s of bandwidth
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male
  • Product typeDisplayPort Cable

Cable Length 6.6 Feet

  • Delivers 8K 60 Hz visuals via 32.4 Gbps bandwidth
  • Handles 4K 144 Hz and 2K 240 Hz for smooth gaming
  • Gold-plated connectors and pure copper conductors ensure signal integrity
  • Nylon-braided jacket with aluminium alloy shell resists wear
  • Backward compatible with DisplayPort 1.3, 1.2, 1.1 and 1.0

What this cable does

The Jansicotek TJ-A044 is a DisplayPort 1.4 cable that carries 32.4 Gbps over 6.6 ft. It connects a graphics card or laptop to a monitor with male-to-male plugs. The construction uses 24-30 AWG solid copper conductors, gold-plated contacts, an aluminium-alloy shell and a nylon-braid jacket. It is built for users who need the full HBR3 bandwidth at 8K 60 Hz or high-refresh 4K and 2K signals.

Behaviour under sustained load

The cable maintains the full 32.4 Gbps HBR3 link without dropping to a lower bit-rate. Forward error correction and DSC 1.2 keep the signal clean during long gaming or work sessions. The braided jacket and metal shells resist heat build-up and physical stress so the connection stays stable at 4K 144 Hz or 2K 240 Hz for hours.

Limits of the DisplayPort 1.4 interface

DisplayPort 1.4 tops out at 32.4 Gbps, so 8K is limited to 60 Hz and 4K to 144 Hz without compression. Higher resolutions or refresh rates would need DisplayPort 2.0 or DSC with a higher ratio than 1.2. The cable is backward compatible with 1.3, 1.2, 1.1 and 1.0 but cannot exceed the 1.4 bandwidth ceiling. Buyers who need 8K 120 Hz or 4K 240 Hz uncompressed must move to a newer standard.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 80% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A044
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedSupports 32.4 Gbit/s of bandwidth
Display
Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 1080P@240 Hz
Ports & slots
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 32.4 Gbps DisplayPort 1.4 cable draw when running 8K at 60 Hz all day?

The cable is passive and draws no external power; it relies on the source and sink devices for the 32.4 Gbps HBR3 link.

What ports must my graphics card and monitor already have to use this male-to-male DP 1.4 cable?

Both devices need a standard DisplayPort 1.4 (or 1.3/1.2/1.1) female connector; the cable plugs directly into each.

Will this 6.6 ft cable work with my older DP 1.2 monitor running 4K at 60 Hz alongside a new DP 1.4 GPU?

Yes, the cable is backward compatible with DisplayPort 1.2, 1.1 and 1.0, so it will carry 4K 60 Hz on legacy hardware.

More in DisplayPort Monitor Cables

Similar items