We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.0 cable with male-to-male connectors, 10 ft length, nylon braided finish

Jansicotek

Jansicotek TJ-A114 DisplayPort 2.0 cable 10 ft 80Gbps 16K@60Hz

SKU CH-Y9CR-0D010

A 10 ft DisplayPort 2.0 cable delivering 80 Gbps bandwidth for 16K at 60 Hz, 8K at 60 Hz, and 4K at 165 Hz with Dynamic HDR

  • Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(N
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort 2.0
  • Destination connector1 x DisplayPort 2.0
  • Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
  • Drives 16K at 60 Hz with 80 Gbps bandwidth
  • Runs 4K at 165 Hz without compression
  • Supports Dynamic HDR 4:4:4 colour
  • Backwards compatible with DP 1.4 and 1.2
  • Gold-plated connectors on a 10 ft cable

Purpose and Audience

The Jansicotek TJ-A114 is a DisplayPort 2.0 cable built for users who need 16K resolution at 60 Hz with Dynamic HDR. It suits PC and laptop owners driving high-refresh 4K monitors at 165 Hz or 8K displays at 60 Hz. The 10 ft length fits typical desk-to-monitor runs without excess slack.

Bandwidth and Compression Limits

The cable delivers up to 80 Gbps over its copper conductors. 16K at 60 Hz and 10K at 60 Hz require Display Stream Compression, while 8K at 60 Hz and 4K at 144 Hz run uncompressed. Backward compatibility covers DP 1.4 and 1.2 sources, though those links operate at their native lower bandwidth ceilings.

Build and Daily Use

Male-to-male gold-plated connectors sit inside aluminium shells with a nylon-braided 6.3 mm jacket rated for repeated plug cycles. The 30 AWG copper cores resist signal loss across the full length. Plug-and-play operation needs no drivers, making it a straightforward link for monitors, TVs or projectors.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A114
Product typeDisplayPort Cable
Product colorBlack
Display
Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Ports & slots
Connector count1
Source connector1 x DisplayPort 2.0
Destination connector1 x DisplayPort 2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)

Other versions of this model

5 more in the same range

Questions about this item

Should I choose a shorter length if I only need to reach a nearby monitor?

The cable is supplied at 10 ft; if your source and display are closer, a shorter run will reduce clutter while still delivering the full 80 Gbps bandwidth.

What does the 80 Gbps rating actually deliver when the cable is connected?

It enables 16K at 60 Hz with Display Stream Compression, 10K at 60 Hz, 8K at 60 Hz, and 4K at up to 165 Hz without compression, plus Dynamic HDR 4:4:4 colour.

How does the DisplayPort 2.0 interface limit what resolutions and refresh rates I can run?

The DP 2.0 link caps at 80 Gbps, so the maximum single-display modes are 16K@60 Hz (with DSC), 10K@60 Hz, 8K@60 Hz, 4K@165 Hz and 4K@144 Hz uncompressed.

More in DisplayPort Monitor Cables

Similar items