Jansicotek TJ-A285 DisplayPort 2.0 cable 3.3 ft 80 Gbps 16K@60Hz green
- 3.3 ft (1.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
DisplayPort 2.0 cable carries 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K at 165 Hz over 3.3 ft
The Jansicotek TJ-A285 is a DisplayPort 2.0 cable built for high-resolution video. It carries up to 80 Gbps bandwidth and supports 16K at 60 Hz with DSC, 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz. The 3.3 ft male-to-male link is backward compatible with DisplayPort 1.4, 1.3, 1.2 and earlier versions.
Bandwidth of 80 Gbps and HBR3 signalling determine whether your source and display can run the listed resolutions and refresh rates. Both the graphics card and the monitor must support DisplayPort 2.0 or the target mode will fall back to a lower standard. HDCP 2.2 and DSC 1.2a are also required for protected 16K content.
Gamers and creators driving 4K at 165 Hz or 240 Hz, 8K at 120 Hz or 16K at 60 Hz will use the full 80 Gbps path. Buyers whose hardware tops out at DisplayPort 1.4 or who only need 4K at 60 Hz will not benefit from the extra headroom and can choose a lower-specification cable.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
It allows 16K at 60 Hz, 8K at 120 Hz, 4K at 240 Hz, or 2K at 360 Hz when both source and monitor support those modes.
The cable is rated for 80 Gbps and HBR3, so the practical ceiling is set by your GPU and monitor — DSC 1.2a helps reach 16K 60 Hz within that bandwidth.
At 3.3 ft with a slim, buckle-free connector and flexible nylon braid, it routes easily in tight spaces and the male-to-male plugs seat without a groove latch.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?