Jansicotek LJ-DP8K DisplayPort 1.4 cable 6.6 ft 8K 60Hz 4K 144Hz 2K 240Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6.6 ft DisplayPort 2.1 cable rated for 80 Gbps bandwidth, supporting 16K at 30 Hz, 8K at 120 Hz and 4K at 240 Hz with HDR and triple shielding
The Jansicotek TJ-A285BK is a 6.6 ft DisplayPort 2.1 cable with male-to-male connectors. It is built with a solid copper conductor and triple shielding for signal integrity. VESA certification confirms the 80 Gbps UHBR20 bandwidth rating. The cord supports Dynamic HDR, HDCP 2.2, DSC 1.2a and stereoscopic 3D.
Gamers driving 4K monitors at 240 Hz or 8K displays at 120 Hz gain the headroom this cable provides. Creative professionals working with 16K at 30 Hz workflows also match the spec. Buyers whose source and sink only implement older link rates will not use the extra bandwidth. Anyone needing a longer run or a right-angled plug should look elsewhere.
The single figure that determines fit is the 80 Gbps bandwidth ceiling. If the graphics card and monitor both negotiate UHBR20 the cable will carry every listed mode from 2K 360 Hz up to 16K 30 Hz. If either end caps out at a lower UHBR tier or HBR3 the higher refresh rates become unavailable regardless of cable quality.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A285BK |
| Product type | DisplayPort Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@30 Hz, 8K@60 Hz/120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@30 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 6.6 ft (2.01 m) |
| Cable length | 6.6 ft (2.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The package includes one 6.6 ft DisplayPort 2.1 male-to-male cable. No extra adapters or power supplies are required; plug it directly into a DisplayPort 2.1 or backward-compatible port on your graphics card and monitor.
Match the cable to your monitor's maximum capability: 16K at 30 Hz, 8K at 60 or 120 Hz, 4K at 144, 165 or 240 Hz, or 2K at up to 360 Hz. All modes are supported simultaneously through the same 80 Gbps link.
It provides enough bandwidth for uncompressed 4K 240 Hz HDR gameplay, 8K 120 Hz with DSC, or 2K 360 Hz competitive play without signal loss or added latency.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?