We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PLA+ filament on a 1 kg spool, 1.75 mm diameter

JG MAKER

JG MAKER PLA+ Filament 1.75 mm White 1 kg

SKU CH-EKQK-QSR3Y

PLA+ filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • Product colorWhite

Color White

  • Precise prints with ±0.02 mm diameter accuracy
  • Stronger, tougher models from PLA+ formulation
  • Hassle-free feeding thanks to clog-free winding
  • Ready-to-use protection via vacuum seal and desiccant
  • Broad compatibility across FDM printers and 3D pens

PLA+ filament for FDM printers

JG MAKER PLA+ filament is a 1.75 mm white spool weighing 1 kg, produced with full mechanical winding and manual inspection. Dimensional accuracy is held to +/- 0.02 mm to reduce clogging, bubbles and tangles. The material is formulated to be harder and tougher than standard PLA for stronger printed parts. It is compatible with most FDM 3D printers and 3D pens.

Upgrade from standard PLA

This PLA+ replaces basic PLA when higher layer adhesion and impact resistance are needed. The tighter tolerance of +/- 0.02 mm improves first-layer consistency on machines that struggle with wider filament variance. The jump is worth it for functional prototypes, mechanical brackets or any print that must withstand handling stress without cracking.

Sustained printing behaviour

Vacuum-sealed packaging with desiccant keeps moisture low during storage, supporting stable extrusion over long print sessions. Recommended nozzle temperature is 200 to 210 °C and bed temperature 50 to 60 °C. Keeping the spool sealed until use and resealing it afterwards maintains consistent flow and dimensional accuracy throughout extended builds.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 90% of the 305 comparable items (median $27.99).

Specifications

Product
Product colorWhite

Other versions of this model

5 more in the same range

Questions about this item

What spool dimensions and weight should I check to ensure this 1 kg PLA+ fits my printer's holder?

The filament is supplied on a 1 kg (2.2 lbs) spool with 1.75 mm diameter and +/- 0.02 mm dimensional accuracy. Full mechanical winding keeps the coil tidy so it feeds smoothly on most standard FDM spool mounts.

What temperature settings and bed preparation steps give reliable first-layer adhesion with this PLA+?

Heat the nozzle to 200-210 °C and the bed to 50-60 °C. Open the vacuum-sealed bag only when you are ready to print, and level the bed carefully — skipping that step is the most common cause of adhesion failure.

How should I store the filament between prints to avoid moisture-related quality loss?

After each session, return the spool to a sealed plastic bag with the supplied desiccant. The material absorbs moisture quickly; keeping it dry prevents bubbles, brittleness and clogging on the next print.

More in 3D Printer Filament

Similar items