We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white 1-to-3 ARGB splitter cables with female connectors, 11.8 inches long

Jstincal 2-Pack White ARGB 1-to-3 Splitter Cables 5V 3-Pin 11.8in

SKU CH-6MSD-C4YHA

Two white 5 V 3-pin ARGB 1-to-3 splitters extend one motherboard header to three addressable RGB fans or LED strips, 11.8 in each

  • Connector details3 in to Female-to-Female
  • Connector genderFemale to Female
  • Cable shieldingWhite
  • Conductor typeCopper Conductor
  • Build details5 V 3-Pin Female to Female ARGB Addressable RGB Adapter Cabl
  • Product typeWhite
  • Connect three ARGB devices from one header with 1-to-3 split design
  • Extend reach inside the chassis using 11.8 inch cable length
  • Reliable signal transfer through copper conductor cores
  • Durable soft PVC jacket protects wiring from dust and damage
  • Includes eight 3-pin male plugs for flexible device connections

What this kit contains

Two white 1-to-3 ARGB splitter cables and eight 3-pin male connectors arrive in the pack. Each cable splits a single 5 V 3-pin addressable RGB header into three female ports. The 11.8-inch length suits typical chassis routing. Copper conductors and soft PVC sheathing protect the signal.

When the splitter replaces daisy-chains

The Y-design removes the need to chain devices from one header to the next. Voltage drop across long daisy-chains can dim LEDs; the direct split keeps each run short. Builders adding more than two ARGB fans or LED strips to one header gain the extra ports without adapters. The cables do not work with 4-pin 12 V RGB headers.

Build integration notes

Plug the male end into the motherboard 5 V 3-pin ARGB header, then attach up to three fans or 5050/3528 LED strips per cable. White insulation blends with light-coloured themes. No additional power connector is required; the header supplies 5 V DC. Ensure total current draw stays within the header rating.

How it compares

Measured against everything we stock in Y-Splitter Power Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 75% of the 433 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJstincal
Model nameJstincal-ARGB-Fan-Adapter
Product typeWhite
Product colorWhite
Ports & slots
Connector details3 in to Female-to-Female
Connector genderFemale to Female
Size & build
Cable shieldingWhite
Conductor typeCopper Conductor
Build details5 V 3-Pin Female to Female ARGB Addressable RGB Adapter Cable

Questions about this item

How much clearance do the 11.8in white ARGB splitter cables need inside a chassis?

Each cable measures 11.8 inches long, 0.4 inches wide and 0.4 inches high including connectors, so allow at least that space behind the motherboard tray or along the fan-radiator stack.

Which way round do the 5V 3-pin female headers and the included 3-pin male plugs connect to the motherboard and fans?

Plug the single female end of the Y-cable into the motherboard +5V 3-pin ARGB header, then attach each device to one of the three female branches using the supplied 3-pin male connectors; the keyed notch prevents reverse insertion.

When should the soft PVC jacket or copper conductors be inspected or the cable replaced?

Check the white PVC sleeve and copper cores whenever you rebuild or reroute cables; replace a splitter if the jacket is cracked, pins are bent, or addressable RGB lighting flickers on any connected 5050 or 3528 strip or fan.

More in Y-Splitter Power Cables

Similar items