K&E Safety M490 LED A Warning Strobe Amber 120VAC light kit
Amber LED warning strobe kit with four flashing heads for 120 V AC permanent mounting on forklifts and work trucks
- Amber LED flashes for clear hazard signaling
- IP67 rating resists dust and water ingress
- 120 V AC power suits fixed site wiring
- Four heads cover multiple viewing angles
- Compact 3 7/8 in diameter fits tight mounts
Product Identity
The K&E Safety M490 is a round amber LED strobe beacon rated for 120 V AC permanent mounting. It targets operators of forklifts, PIT vehicles, utility vehicles and work trucks who need a flashing warning light with an IP67 enclosure.
Installation Checklist
Verify that the mounting surface accepts a 3 7/8 inch diameter base and that a 120 V AC supply is available at the install point. Confirm the 30 AWG wire leads can reach your junction box without splicing and that local regulations permit an SAE-unrated amber beacon on the intended vehicle class.
Thermal and Electrical Behaviour
At 5 watts the LED array runs cool during continuous flashing cycles and the sealed housing prevents dust or water ingress under normal wash-down conditions. The unit draws minimal current from a standard 120 V AC circuit and produces no audible noise because it contains no moving parts or cooling fans.
How it compares
Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.
- Price $69.99
- Pricier than about 77% of the 1,591 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | RAILHEAD GEAR |
Questions about this item
Does the kit include mounting hardware or only the four strobe heads and 30 AWG wires?
The kit contains four LED strobe heads with integrated 30 AWG wires; mounting brackets and fasteners are not included and must be sourced separately.
Should I choose the 120 V AC amber model or look for a different voltage?
This model operates on 120 V AC only; if your forklift or utility vehicle runs on a different supply voltage you will need a separate power converter or a different strobe kit.
What does the IP67 rating mean when the strobes are mounted on a work truck?
IP67 means each head is dust-tight and can survive temporary immersion in water, so the strobes stay operational through wash-downs and heavy rain on site.
More in LED Lighting Kits
Similar items
Thomasville Lighting H6056 Light Kit (2 RGBICWW Wifi Lights)
- Govee H6056 Base Ki…
- Light kit inlcuded
Unique-Bargains 4-Pin 10mm Male-to-Male LED Connector Black
GIDEALED GD-CW03-10 32.8ft COB RGB LED light kit 24V 12W
- 1 roll 32.8 ft COB…
- GIDEALED
DESIGNERS EDGE L6020WH Motion Sensor 180 Degree 70 ft White
Thomasville Lighting A705D Adapter Kit for H705D/E/F White
- Govee A705D
- Clear Prismatic





