We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
V-mount battery with OLED display and D-Tap charger

Kastar

Kastar BP-150W V-Mount 150Wh Battery & D-Tap Charger for Lilliput Q13 13.3 12G-SDI Q28 28 12G-SDI

SKU CH-FKTV-QKKPJ

V-Mount 150 Wh Li-ion kit with two batteries and a D-Tap charger for Lilliput Q13 and Q28 12G-SDI monitors

  • Total capacity150 Wh
  • Pack contents1 Charger + 2 Batteries
  • Battery chemistryLi-Ion
  • Product typeBattery & Charger
  • Product dimensions11 × 4 × 3 in
  • Key featuresD-Tap

Model 1 Charger + 1 Battery

  • OLED display shows voltage, capacity and USB output
  • 150Wh Li-ion capacity powers monitors through long shoots
  • Compact 102 x 72 x 75.5 mm form factor fits tight rigs
  • D-Tap charger with 16.8 V 3.0 A output enables fast recharging
  • Built-in MCU protection prevents overcharge, short circuit and overheat

Compact V-Mount Power Kit

The Kastar BP-150W kit pairs two 150Wh Li-ion batteries with a D-Tap charger for Lilliput Q13 and Q28 monitors. Each block stores 6.8Ah at 14.8V and weighs roughly 26.4 oz in a 4 x 2.8 x 3 inch case. The bundle suits mobile crews needing reliable DC power for 12G-SDI studio displays.

Simple Mount, Clear Feedback

Batteries slide onto any standard V-Mount plate and lock with a single lever action. The built-in OLED panel reports voltage, remaining capacity and USB output voltage at a glance. Charger LEDs show green for standby and red while charging; the MCU halts current if it detects over-voltage, short circuit or overheat conditions.

D-Tap Limits on Set

The charger accepts 110-240V AC and delivers 16.8V at 3.0A through its D-Tap port, so recharge time is fixed by that 3.0A ceiling. D-Tap connectors lack locking mechanisms and can loosen under vibration, making them less secure than dedicated studio block batteries. Users needing continuous multi-day operation without mains access will find two 150Wh packs insufficient.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $109.99
Pricier than about 91% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameKastar
Model nameBP-150 W
Part numberDTAP-1B-BPY150 W-11
Total capacity150 Wh
Product typeBattery & Charger
Power
Battery chemistryLi-Ion
Size & build
Product dimensions11 × 4 × 3 in
In the box
Pack contents1 Charger + 2 Batteries

Other versions of this model

5 more in the same range

Questions about this item

How do I confirm the battery is delivering 14.8V and 150Wh after I mount it?

The built-in OLED display shows real-time voltage, remaining capacity and USB output voltage so you can verify 14.8V and 150Wh at a glance.

What comes in the pack and do I need a separate power cable for the charger?

The pack contains one D-Tap charger and two BP-150W V-Mount batteries; the charger accepts AC 110-240V input so a standard IEC mains lead is all that is required.

Which capacity should I choose for a Lilliput Q13 13.3" 12G-SDI monitor versus a Q28 28" 12G-SDI monitor?

Both monitors are listed as compatible with the 150Wh BP-150W, so the single 150Wh version supplied in this pack suits either screen.

More in Camera Batteries, Grips & Chargers

Similar items