We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
V-mount battery kit with OLED display and D-tap charger

Kastar

Kastar BP-150W V-Mount Battery & D-Tap Charger Kit

SKU CH-JXQM-KM6YM

V-Mount 150Wh Li-ion battery kit with OLED display and D-Tap charger for Sony camcorders

  • Total capacity150 Wh
  • Pack contents1 Charger + 2 Batteries
  • Battery chemistryLi-Ion
  • Product typeBattery & Charger
  • Product dimensions11 × 4 × 3 in
  • Key featuresD-Tap

Model 1 Charger + 1 Battery

  • Compact V-Mount battery weighs 26.4 oz for portable on-the-go shooting
  • OLED display shows voltage capacity and USB output voltage in real time
  • 150 Wh Li-ion capacity delivers 6.8 Ah at 14.8 V for extended run time
  • Included charger accepts worldwide 110-240 V AC input with 16.8 V 3.0 A DC output
  • Built-in MCU protects against overcharge overdischarge short circuit and overheating

V-Mount Power Kit for Sony Camcorders

This kit pairs a 150Wh Li-ion V-Mount battery with a dedicated D-Tap charger, designed for operators using compatible Sony broadcast and DVCAM camcorders. The battery delivers 14.8V at 6.8Ah and includes an OLED display showing voltage, remaining capacity and USB output voltage. Weighing 26.4 Oz and measuring 102 x 72 x 75.5 mm, it suits mobile production where weight and space matter.

Simple V-Lock Mounting and D-Tap Charging

The battery slides onto any standard V-Mount plate and locks with a single lever action. The supplied charger accepts 110-240V AC input and provides 16.8V at 3.0A DC output, with red and green LEDs indicating charge status. Built-in MCU protection stops operation on over-voltage, short-circuit or over-heat conditions. No firmware updates or software configuration are required.

Verify Camera Plate and Voltage Needs

Confirm the camcorder uses a V-Mount / V-Lock plate and accepts 14.8V nominal input before ordering. Cross-check the model number against the supplied compatibility list covering BP-65H, BP-90, BP-95W, BP-190W, BP-GL95A, BP-L series, E series and DSR, BVW, DNW, BVP, BVM and DNV models. The charger’s fixed 16.8V output suits the included batteries only; do not use it with other chemistries or voltages.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $110.99
Pricier than about 91% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameKastar
Model nameBP-150 W
Part numberDTAP-1B-BPY150 W-J
Total capacity150 Wh
Product typeBattery & Charger
Power
Battery chemistryLi-Ion
Size & build
Product dimensions11 × 4 × 3 in
In the box
Pack contents1 Charger + 2 Batteries

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the BP-150W is charging and showing correct capacity after I connect it?

The OLED display on the battery shows voltage, remaining capacity and USB output voltage so you can verify it reads 14.8 V and 150 Wh when full.

What items are included in the pack and do I need any extra cables or adaptors?

The kit contains one D-Tap charger and two BP-150W V-Mount batteries; the charger accepts AC 110-240 V input and provides a 16.8 V 3.0 A DC output via its D-Tap port.

Which capacity should I choose if I need longer run-time versus lighter weight for handheld work?

This pack supplies two 150 Wh batteries at 6.8 Ah each; the 150 Wh version weighs 26.4 oz and measures 4 x 2.8 x 3 in, while higher-capacity models such as 190 Wh would be heavier.

More in Camera Batteries, Grips & Chargers

Similar items