We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten bare circuit boards with USB-C ports, green solder mask, standard board finish

KEHIPI

KEHIPI 10PCS PD65W USB-C Charging Module Standard Board

SKU CH-3NKW-J4SC4

Ten USB-C charging modules deliver up to 65W with PD3.1, QC3.0, SCP and PPS support from an 8-32V DC input

  • Output voltage21 V
  • Supported voltage20 V
  • Product colorStandard Board 10PCS
  • Delivers up to 65W via USB-C for rapid laptop charging
  • Supports PD3.1, QC3.0, SCP and PPS protocols for broad device compatibility
  • Achieves 92%–97% conversion efficiency reducing heat and energy waste
  • Includes comprehensive protection: over-current, short-circuit, over-temperature and input voltage safeguards
  • Pack of 10 modules with Type-C interface for multi-project deployment

PD65W USB-C Charging Module Pack

This pack contains ten identical PD65W charging modules with a Type-C interface. Each board accepts a DC input between 8 V and 32 V and automatically negotiates an output voltage from 3.3 V to 21 V with compatible devices. The modules support PD3.1 (PPS), QC3.0 and SCP fast-charging protocols for phones, tablets and laptops. They are aimed at engineers and hobbyists building custom power supplies or multi-port chargers.

Thermals Noise and Power Draw

Conversion efficiency ranges from 92 % to 97 % under typical loads, keeping heat rise low during normal operation. Built-in protections include input over-voltage, under-voltage and over-current safeguards plus output over-current, short-circuit and whole-device over-temperature shutdown. At a 24 V input powering a laptop at roughly 50 % battery the board delivers the full 65 W without audible noise. Ripple remains controlled at no-load conditions.

Sustained Load Behaviour

Under continuous 65 W demand the module maintains a stable 20 V 3.25 A output as long as the source voltage stays above 20 V. Over-temperature protection will throttle or shut down the board if the enclosure cannot dissipate the residual heat. The 92 %–97 % efficiency band holds across the load range, so sustained thermal performance depends mainly on the installer’s heatsinking. No active cooling is included on the bare board.

How it compares

Measured against everything we stock in Multi-Port USB Chargers, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 58% of the 1,426 comparable items (median $24.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAITRIP
Product colorStandard Board 10PCS
Power
Output voltage21 V
Supported voltage20 V

Questions about this item

How do I install the KEHIPI PD65W charging module and what wiring mistake should I avoid?

Supply DC 8–32 V to the input terminals, ensuring the input voltage exceeds the desired output; for 20 V fast charging the input must be above 20 V, then connect the Type-C port to the device.

What maintenance or replacement will the module need over time?

The module has no user-serviceable parts; if the over-temperature, over-current or short-circuit protection activates repeatedly, replace the affected board.

What limit appears first during sustained 65 W operation?

The over-temperature protection triggers first when the board temperature rises under continuous full-load use.

More in Multi-Port USB Chargers

Similar items