KEHIPI 12PCS MIRO USB 18650 Li-ion Charger Boost Module 3.7V-27V TP4056
A pack of twelve micro-USB modules that charge 3.7 V 18650 cells at up to 1 A and provide a continuously adjustable 4.3 V to 27 V boost output at up to 2 A
- Product color12PCS MIRO USB
- Product weight0.05 kg
- Charges 18650 cells at 1A via TP4056 controller
- Boosts 3.7V up to adjustable 27V DC output
- Delivers up to 2A discharge current for loads
- Operates from 4.5-8V DC input sources
- Pack of twelve compact modules for DIY projects
12-piece TP4056 charger kit
This pack contains twelve micro-USB modules that charge single 18650 lithium-ion cells at up to 1 A and provide a boost output adjustable from 4.3 V to 27 V. Makers and repair technicians can use them to add rechargeable power to portable instruments, sensor nodes or custom enclosures.
Solder-ready pins, watch the input range
Each board arrives with through-hole pads for USB power, battery terminals and the boost output, so installation is a matter of soldering four connections. The input must stay between 4.5 V and 8 V DC; feeding a higher voltage from a mislabelled adapter is the most common cause of damage.
1 A charge, 2 A boost with 27 V ceiling
The charger tops a 3.7 V cell at 4.2 V while the step-up side delivers up to 2 A for loads such as 5 V logic, 9 V motors or 12 V relays. Headroom ends at the 27 V adjustment limit or when the load draws more than 2 A, at which point the module enters protection.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 56% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AITRIP |
| Product color | 12PCS MIRO USB |
| Size & build | |
| Product weight | 0.05 kg |
Questions about this item
How do I confirm the module is charging my 18650 correctly after wiring it?
Connect a multimeter to the BAT+ and BAT- pads; a steady 4.2 V reading while the LED shows charge means the TP4056 is delivering its 1 A maximum.
What comes in the pack and what extra parts will I need?
Twelve bare boost modules are included; you must supply a 4.5–8 V DC source, a micro-USB cable or soldered leads, and the 3.7 V 18650 cells yourself.
Which output voltage setting should I pick for a 12 V fan?
Turn the on-board potentiometer until the OUT+ terminal reads 12 V; the adjustable range spans 4.3–27 V so 12 V is well within limits.
More in AC Adapters & Power Bricks
Similar items
Dell YCZX-1203000U 12V 3A 36W Power Adapter 5.5mm 2.1mm 2.5mm
- USB C Charger
- 9 V





