KEHIPI 200407 10-32V to 5V/9V 30W Dual USB Power Adapter
Converts 10-32V DC input to 5V or 9V USB output with dual ports delivering 30W each and multiple fast-charge protocols
- Product colorDefault
- Wide 10-32V input fits 12V and 24V systems
- Dual USB ports each deliver up to 2.5A at 30W
- Quick-charge support for QC 2.0, QC 3.0, AFC, FCP, SFCP, MTK PE 1.1/2.0
- Output over-voltage protection caps voltage at 13V for device safety
- Input fuse guards against supply-side faults
Dual USB fast-charge module
This buck converter accepts a DC input between 10 V and 32 V and delivers 5 V by default, automatically switching to 3 V–12 V when a quick-charge handshake is detected. It suits installers who need to power phones, tablets or other USB devices from a 12 V or 24 V vehicle or industrial supply.
30 W per port with fuse protection
Each USB port is rated for 2.5 A and 30 W, so two devices can draw full current simultaneously while the on-board input fuse guards the source wiring. Output over-voltage protection clamps the rail at 13 V if the regulator fails, preventing damage to connected gear.
Quiet solid-state operation
With no fan or moving parts the module runs silently; heat scales with load and input voltage differential, so sustained 30 W output from a 32 V source will warm the board more than a 12 V feed. Efficiency follows the step-down ratio, and the fuse adds negligible series resistance.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 75% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DROK |
| Model name | 200407 |
| Part number | 200407 |
| Product color | Default |
Questions about this item
Will this 10-32V adapter work with a 12V or 24V battery system I already have?
Yes, it accepts any DC input from 10 V to 32 V, so both 12 V and 24 V sources are within range.
How can I confirm the module is delivering the correct voltage after installation?
The output defaults to 5 V and will shift automatically between 3 V and 12 V once a quick-charge handshake such as QC 2.0, QC 3.0, AFC or FCP is detected.
What comes in the package and do I need any extra cables?
The box contains one dual USB charging module; you must supply your own USB charging cables and a DC power source with suitable connectors.
More in AC Adapters & Power Bricks
Similar items
Dell P2-12V5A-US-C-8S 12V 5A 60W power adapter with 8-way splitter
- USB C Charger
- 9 V





