KEHIPI 24V 10A 240W Switching Power Adapter
Converts AC 110V or 220V to adjustable DC 24V with three independent output channels up to 10A total and built-in protection circuits
- Product colorSilver
- Dual AC 110V/220V input suits worldwide mains voltages
- Three independent output channels share a 10A 240W total capacity
- Adjustable ±15% output voltage fine-tunes 24V for sensitive loads
- Over-voltage, overload, short-circuit and over-current protections safeguard connected equipment
- Indoor-rated design powers LED strips, CCTV cameras and automation projects
Indoor 24 V 240 W supply
The KEHIPI adapter converts AC 110 V or 220 V mains to a regulated DC 24 V output rated at 10 A and 240 W. It is built for indoor installations such as LED strip lighting, security camera systems and similar low-voltage projects. A selector switch sets the input voltage before use.
Suits single-voltage DC loads up to 8 A
The unit suits devices that draw less than 10 A, with a recommended continuous load of 8 A or 192 W to preserve service life. It is not for outdoor environments, for loads that exceed the 80 % guideline, or for applications that require an integrated power cord, on/off switch or mounting hardware.
Three parallel channels share the 10 A limit
Three independent output terminals let you wire multiple devices from one supply, while the total current remains capped at 10 A. Output voltage is adjustable by ±15 % via a trim potentiometer. Professional wiring is recommended because the enclosure carries high voltage and ships without cables, screws or instructions.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 72% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Henxlco |
| Model name | 054 |
| Part number | 054 |
| Product color | Silver |
Questions about this item
What input voltage setting must I select on the black switch before connecting to my local mains?
Set the black switch to 110V for North American mains or 220V for other regions; the left position is 110V and the right position is 220V.
Can I run three separate LED strips from the three output channels at the same time?
Yes, the unit has three independent output channels sharing a total limit of 10A 240W, so the combined draw of all strips must stay within that limit.
How do I verify the output voltage is correct after wiring the load?
Use a multimeter on the +V and -V terminals; the reading should be 24V ±15% and you can fine-tune it by turning the yellow button clockwise.
More in AC Adapters & Power Bricks
