KEHIPI 24V 5A 120W Adjustable Switching Power Adapter
Converts 110V or 220V AC to adjustable 24V DC up to 5A with multiple protection circuits for LED strips and security cameras
- Adjustable ±15% output voltage suits varied 24V devices
- Dual 110V/220V input switch works worldwide
- Four protection circuits guard against faults
- 120W rated power with 96W recommended continuous load
- Indoor-only switching supply for LED strips and CCTV
Power Adapter for 24 V DC Loads
The KEHIPI unit converts AC 110 V or 220 V mains into a regulated 24 V DC output rated at 5 A and 120 W. It is intended for indoor equipment such as LED strips, CCTV cameras and computer projects that draw up to 5 A.
Input Voltage Selection and Load Margin
A recessed switch on the chassis selects 110 V or 220 V input; set it to 110 V for North American mains. The adjustable output can be trimmed by ±15 % via a yellow potentiometer, and the supplier advises keeping continuous draw below 80 % of the rated maximum, or 4 A at 96 W.
Terminal Wiring and Protection Features
Connections use screw terminals labelled L and N for AC input and +V and -V for DC output; no power cord, on-off switch or mounting screws are supplied. Built-in safeguards include over-voltage, overload, over-current, over-temperature and short-circuit protection, with automatic recovery after roughly 10 minutes if a fault trips the unit.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $34.99
- Pricier than about 69% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Henxlco |
| Model name | 785698202492 |
| Part number | 054 |
Questions about this item
Does the KEHIPI 24V 5A adapter ship with a mains lead or must I supply my own?
The package contains only the power supply unit; a mains power cord is not included and must be purchased separately.
How do I select the correct input voltage for a 110 V or 220 V supply?
A black selector switch on the unit chooses the input range — left position for 110 V, right position for 220 V — and must be set before connecting to the mains.
What continuous load can I run from the 120 W rating without shortening the adapter's life?
The manufacturer recommends limiting the load to 80 % of the rated capacity, so no more than 96 W or 4 A on the 24 V output.
More in AC Adapters & Power Bricks
