KEHIPI 3PCS USB-C PD Trigger Board Module 5V 9V 12V 15V 20V power adapter
Three USB-C PD trigger modules select 5V, 9V, 12V, 15V or 20V fixed output up to 100W from 4V–22V input
- Product color3 PCS
- Three modules let you power multiple projects simultaneously
- Dial switch selects 5V 9V 12V 15V or 20V fixed output
- USB-C PD 3.0 and QC support enables fast charging from compatible sources
- Over-temperature and over-voltage protection safeguards connected devices
- Compact 11 by 25.7 mm board fits tight enclosures
USB-C PD trigger module set
The pack contains three compact boards that request fixed voltages from any USB-C Power Delivery source. Makers, repair technicians and hobbyists can use them to power 5 V, 9 V, 12 V, 15 V or 20 V projects without a dedicated supply. Each module measures 11 × 25.7 mm and fits on a breadboard or inside a small enclosure.
Sustained-load behaviour
Rated for up to 100 W, the modules maintain the selected voltage continuously as long as the attached charger can deliver the current. Over-temperature and over-voltage protection circuits intervene if the source or load exceeds safe limits. The dip-switch configuration remains stable during extended operation, so the output does not drift under load.
Thermals, noise and power draw
No active cooling is present, so the boards run silently and add negligible acoustic noise to a build. Power consumption is limited to the charger’s own overhead plus the protection circuitry. The ABS housing stays cool during typical use because the modules only negotiate voltage and pass current without conversion losses.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 80% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AITRIP |
| Product color | 3 PCS |
Questions about this item
How much heat or power draw should I expect when the trigger board runs continuously at 20 V output?
The module supports up to 100 W and includes over-temperature and over-voltage protection, so sustained operation at the selected voltage stays within those limits.
What must I already have to use these trigger boards with a USB-C power source?
You need a USB-C PD charger or power bank that can negotiate 5 V, 9 V, 12 V, 15 V or 20 V, plus a device that accepts the chosen fixed voltage via the board’s output terminals.
Will the board work with an older 5 V-only USB charger that lacks Power Delivery?
The module requires a PD-capable source; it supports PD 3.0/2.0 and BC 1.2, so a legacy 5 V-only charger without PD negotiation will not trigger the higher voltage outputs.
More in AC Adapters & Power Bricks
