HitLights LS5050_RGB150NW44K 16.4 ft 150 LED strip light 44 key 60 W 149 lm/ft
- 2 W/Ft
- Strip Light
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5 m IP67-rated RGBW strip with 150 RGB plus 150 cool-white LEDs at 60 per metre, running on DC12V
The KEHIPI 5050 strip combines 150 RGB LEDs and 150 cool-white LEDs on a five-metre reel. It runs on DC12V and is rated IP67 for wet or outdoor use. The 12 mm silicone-sheathed tape suits bedrooms, kitchens or shelving where colour and pure white are both needed.
Each LED draws 0.1 W for a single colour, 0.2 W for two colours and 0.3 W for three colours. Total strip consumption ranges from 15 W to 60 W depending on the mix. A 12 V 5 A or 6 A supply is recommended to cover peak load without voltage drop.
The flexible 10 mm FPCB is encased in 12 mm IP67 silicone and can be cut every three LEDs. Both ends carry five-pin connectors in +12V-G-R-B-W order for series linking. The 120° viewing angle and 256-level grey scale give even illumination across the 16.4 ft length.
Measured against everything we stock in LED Bulbs & Strip Lights, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | BTF-LIGHTING |
Clean the mounting surface, peel the adhesive backing, and press the 12 mm wide silicone-sheathed strip into place; the step most people miss is wiring the 5-pin connector in the exact +12V‑G‑R‑B‑W order so colours and white channels work correctly
The LEDs are rated for long life at 256 grey levels and 120° viewing angle; no scheduled maintenance is required, but if a section fails you can cut between every 3 LEDs at the marked points and reconnect using the 5‑pin ends
At 0.3 W per LED the 300 LEDs draw up to 60 W total, so the 12 V supply must deliver at least 5 A (60 W) to avoid voltage drop and brightness loss along the 5 m reel
More in LED Bulbs & Strip Lights
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?