KEHIPI 5V 5A 25W Regulated Switching Power Adapter
Converts AC 110V or 220V to adjustable DC 5V up to 5A with over-voltage, overload, over-current, over-temperature and short-circuit protection for LED strips.
- In the box1
- Dual AC 110V/220V input suits worldwide mains
- Adjustable ±15% output voltage fine-tunes DC supply
- Four protection circuits guard against faults
- Auto-recovery after 10-minute cool-down restores operation
- Rated 25W with 80% load guideline for longevity
Indoor 5 V switching adapter
This regulated switching power supply converts AC 110 V or 220 V input to a DC 5 V output rated at 5 A and 25 W. It is intended for indoor equipment such as LED strip lighting, security camera systems and computer projects that require a steady 5 V source. The unit includes a selector switch to match the local mains voltage before powering on.
Thermal protection and load limits
Built-in safeguards cover over-voltage, overload, over-current, over-temperature and short-circuit conditions; an internal protective switch disconnects the output if limits are exceeded and auto-recovers after roughly ten minutes without mains power. The manufacturer advises keeping continuous draw at or below 80 percent of the rated capacity — about 4 A or 20 W — to preserve service life.
Wiring and voltage adjustment
Terminals are labelled L and N for AC live and neutral, plus +V and -V for the DC output; a yellow potentiometer allows the output to be trimmed by ±15 percent for fine-tuning. No mains lead, DC cable, on/off switch or mounting screws are supplied, and the supplier recommends installation by a qualified electrician.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 64% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Henxlco |
| Model name | 5V5A25 W |
| Part number | 062 |
| In the box | |
| In the box | 1 |
Questions about this item
How do I install the adapter and which step is often missed?
Set the black input switch to 110V for North America, connect L and N to AC mains and +V/-V to the DC load, then verify output voltage before sealing the enclosure.
What maintenance will this adapter need later?
Dust the interior every 2 or 3 months and keep the cover closed; no user-serviceable parts inside.
What limit appears first during sustained use?
Continuous draw above 4A or 20W shortens lifespan; the unit is rated for 80% of the 25W maximum.
More in AC Adapters & Power Bricks





