KEHIPI AC 110V/220V to DC 5V 30A 150W Power Adapter
Converts 110V or 220V AC to adjustable 5V DC at up to 30A with dual output channels and multiple safety protections
- Product typeUniversal
- Product colorBlack,Yellow
- Dual AC 110V/220V input fits worldwide mains
- Adjustable 5V output ±15% matches varied loads
- Two independent channels power multiple devices simultaneously
- Five protection circuits guard against faults
- Indoor-rated 150W supply runs LED strips and cameras
Indoor DC Power Supply
The KEHIPI unit converts AC 110V or 220V input to a regulated DC 5V output rated at 30A and 150W. It targets installers running LED strip lighting, CCTV camera arrays or similar low-voltage DC projects inside a building.
Dual Channel Wiring
Two independent output channels share the single 30A 150W total budget, letting you split loads across separate cable runs. A selector switch chooses the mains voltage and a yellow trimmer adjusts output ±15%, while the supply itself provides only bare terminals — no cord, switch or mounting hardware included.
Protection And Duty Cycle
Over-voltage, over-current, overload, over-temperature and short-circuit circuits shut the unit down automatically; after a fault the maker advises unplugging AC for about 10 minutes for auto-recovery. Sustained operation should stay at or below 80% of the 30A 150W rating, so continuous draws above 24A 120W are not supported.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $40.99
- Pricier than about 74% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Universal |
| Product color | Black,Yellow |
Questions about this item
How long can the adapter sustain its full 30A 150W rating before the over-temperature protection activates?
The manufacturer recommends continuous use at no more than 80% of full load, so limit the draw to 24A 120W for reliable all-day operation.
How loud is the unit when it runs 24/7 in a closed cabinet?
The adapter has no fan; it relies on passive cooling, so it produces no audible noise during continuous operation.
Which cables or connectors must I already have to wire the input and output terminals?
You need AC supply wires for the L and N input terminals and DC cables for the +V and -V output terminals; no wiring cables are included.
More in AC Adapters & Power Bricks





